ISO 11855-2:2021 建物環境の設計—組み込み放射加熱および冷却システム—パート2:設計の加熱および冷却能力の決定 | ページ 6

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

3 用語と定義

このドキュメントの目的のために、ISO 11855-1 に記載されている用語と定義が適用されます。

ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。

参考文献

[1]ISO 7726, 熱環境のエルゴノミクス — 物理量を測定するための機器
[2]ISO 7730, 温熱環境のエルゴノミクス — PMV および PPD 指数の計算と局所温熱快適性基準を使用した温熱快適性の分析的決定と解釈
[3]ISO 10456, 建材および製品 - 吸湿熱特性 - 表にされた設計値と、宣言および設計熱値を決定するための手順
[4]ISO 11855-3, 建築環境設計 — 組み込み放射暖房および冷房システム — 3: 設計と寸法
[5]ISO 11855-4, 建築環境設計 — 組み込み放射加熱および冷却システム — 4: サーモ アクティブ ビルディング システム (TABS) の動的冷暖房能力の寸法と計算
[6]ISO 13370, 建物の熱性能 — 地面を介した熱伝達 — 計算方法
[7]ISO 13732-1, 熱環境のエルゴノミクス - 表面との接触に対する人間の反応の評価方法 - 1: 表面が高温
[8]ISO/TS 13732-2, 熱環境のエルゴノミクス — 表面との接触に対する人間の反応の評価方法 — 2: 適度な温度での表面との人間の接触
[9]EN 1264, 水ベースの表面埋め込み加熱および冷却システム
[10]EN 12831, 建物内の暖房システム — 設計熱負荷の計算方法
[11]EN 13202, 熱環境のエルゴノミクス — 接触可能な高温面の温度 — EN 563 の助けを借りて、生産規格における表面温度限界値を確立するためのガイダンス
[12]ANSI/ASHRAE 規格 55, 人が占有するための熱環境条件
[13]コンツェルマン。 M. および G. Zöllner: 表面に統合された加熱および冷却面の熱性能。 HLH 56 (2005) に掲載。いいえ。第3回 30~34ページ
[14]コンツェルマン。 M. and G. Zöllner: 床暖房の熱試験。
HLH 33 (1982) に掲載。いいえ。第4回 136~142頁
[15]Glück, B.: 熱活性コンポーネント表面の熱伝達係数と、熱流密度の基本特性への移行。 Health Engineer 128 (2007) No 1. pp. 1-10 に掲載
[16]Konzelmann M.、Zöllner G.、床暖房の熱試験。 HLH 33 (1982) に掲載。 No. 4. P. 136-142
[17]Kast W.、Klan H.、Bohle J.、床暖房の熱出力。 HLH 37 (1986) に掲載。 No. 4. P. 175-182
[18]Konzelmann M.、Zöllner G.、温水床下暖房の設計と熱試験。 SHTに掲載されました。 1984年、4 pp.255–259
[19]Kast W.、Klan H.、Bohle J.、床暖房Part 2 の熱出力。HLH 37 (1986) に掲載。 No. 10. P. 497-502
[20]Schmidt P.、熱需要計算における暖房システムと外部領域の追加領域の影響の調査; VDIマガジンの進捗報告です。シリーズ 6. No. 80 (1981)
[21]Konzelmann M.、床下暖房からの熱放出.-試験方法の開発;進捗レポート VD行 19: 加熱技術/冷凍技術。 No. 23. VDI-Verlag デュッセルドルフ、1988 年
[22]Bohle J, Klan Hパネル加熱および冷却システムの設計。 ASHRAE トランザクション、2000 年
[23]Koschenz M.、Lehmann B.、Thermoactive Building Systemタブ。 EMPA, スイス、2000
[24]Glück B.、部屋の暖房面とパイプからの熱伝達。建設のための VEB 出版社、ベルリン、1989 年
[25]Schneider PJ, 伝導熱伝達。 2回目の印刷。 Addison-Wesley Publishing Co. Inc, マサチューセッツ州レディング、1957
[26]Heiselberg Per, 冷たい垂直壁のある部屋の成層流。 ASHRAE Trans. 1994. V.100.ポイント。 1
[27]ハンドブック ASHRAE, HVAC アプリケーション、一般的なアプリケーション。第55章 放射暖房と冷房
[28]ハンドブック ASHRAE, HVAC システムおよび機器、空調および暖房システム。第6章 放射暖房と冷房
[29]ハンドブック ASHRAE, 基礎、室内環境品質。第9章 熱的快適性
[30]Watson RD, Chapman KS, 放射加熱および冷却ハンドブック。マグロウヒル、2002

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 11855-1 apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

Bibliography

[1]ISO 7726, Ergonomics of the thermal environment — Instruments for measuring physical quantities
[2]ISO 7730, Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
[3]ISO 10456, Building materials and products- Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
[4]ISO 11855-3, Building environment design — Embedded radiant heating and cooling systems — 3: Design and dimensioning
[5]ISO 11855-4, Building environment design — Embedded radiant heating and cooling systems — 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
[6]ISO 13370, Thermal performance of buildings — Heat transfer via the ground — Calculation methods
[7]ISO 13732-1, Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - 1: Hot surfaces
[8]ISO/TS 13732-2, Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — 2: Human contact with surfaces at moderate temperature
[9]EN 1264, Water based surface embedded heating and cooling systems
[10]EN 12831, Heating systems in buildings — Method for calculation of the design heat load
[11]EN 13202, Ergonomics of the thermal environment — Temperatures of touchable hot surfaces — Guidance for establishing surface temperature limit values in production standards with the aid of EN 563
[12]ANSI/ASHRAE Standard 55, Thermal environmental conditions for human occupancy
[13]Konzelmann. M. and G. Zöllner: Thermische Leistungen flächenintegrierter Heiz- und Kühlflächen. Published in HLH 56 (2005). No. 3. pp. 30-34
[14]Konzelmann. M. and G. Zöllner: Wärmetechnische Prüfung von Fußbodenheizungen.
Published in HLH 33 (1982). No. 4. pp. 136-142
[15]Glück, B.: Wärmeübergangskoeffizienten an thermisch aktiven Bauteiloberflächen und der Übergang zu Basiskennlinien für die Wärmestromdichte. Published in Gesundheits-Ingenieur 128 (2007) No 1. pp. 1-10
[16]Konzelmann M., Zöllner G., Wärmetechnische Prüfung von Fußbodenheizungen. Veröffentlicht in HLH 33 (1982). Nr. 4. S. 136-142
[17]Kast W., Klan H., Bohle J., Wärmeleistung von Fußbodenheizungen. Veröffentlicht in HLH 37 (1986). Nr. 4. S. 175-182
[18]Konzelmann M., Zöllner G., Auslegung und wärmetechnische Prüfung von Warmwasser-Fußbodenheizungen. Veröffentlicht in SHT. 1984, 4 pp. 255–259
[19]Kast W., Klan H., Bohle J., Wärmeleistung von Fußbodenheizungen Teil 2. Veröffentlicht in HLH 37 (1986). Nr. 10. S. 497-502
[20]Schmidt P., Untersuchung zum Einfluss des Heizsystems und zum Außenflächenzuschlag bei der Wärmebedarfsrechnung; Fortschritt-Berichte der VDI-Zeitschriften. Reihe 6. Nr 80 (1981)
[21]Konzelmann M., Wärmeabgabe von Fußbodenheizungen.- Entwicklung einer Prüfmethode; Fortschritt-Berichte VDI. Reihe 19: Wärmetechnik/Kältetechnik. Nr. 23. VDI-Verlag Düsseldorf, 1988
[22]Bohle J., Klan H., Design of Panel Heating and Cooling Systems. ASHRAE Transactions, 2000
[23]Koschenz M., Lehmann B., Thermoaktive Bauteilsysteme. tabs. EMPA, Switzerland, 2000
[24]Glück B., Wärmeübertragung von Raumheizflächen und Rohren. VEB Verlag für Bauwesen, Berlin, 1989
[25]Schneider P.J., Conduction Heat Transfer. 2nd Printing. Addison-Wesley Publishing Co. Inc, Reading, MA, 1957
[26]Heiselberg Per, Stratified flow in Rooms with a Cold Vertical Wall. ASHRAE Trans. 1994. V.100. Pt. 1
[27]Handbook A.S.H.R.A.E., HVAC Applications, General Applications. Chapter 55. Radiant Heating and Cooling
[28]Handbook A.S.H.R.A.E., HVAC Systems and Equipment, Air-Conditioning and Heating Systems. Chapter 6. Radiant Heating and Cooling
[29]Handbook A.S.H.R.A.E., Fundamentals, Indoor environmental quality. Chapter 9. Thermal Comfort
[30]Watson R.D., Chapman K.S., Radiant Heating and Cooling Handbook. McGraw-Hill, 2002