この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 11855-4 は、技術委員会 ISO/TC 205, 建築環境設計によって作成されました。
ISO 11855 は、以下の部分で構成されており、一般的なタイトルは「建築環境設計 — 組み込み放射加熱および冷却システムの設計、寸法、設置および制御」です。
- Part 1:定義、記号、および快適性の基準
- Part 2:設計と冷暖房能力の決定
- Part 3:設計と寸法
- Part 4:サーモ アクティブ ビルディング システム (TABS) の動的冷暖房能力の寸法と計算
- Part 5:インストール
- Part 6:コントロール
第 1 部では、放射冷暖房システムの主な目的は居住者の熱的快適性を満たすことであるため、組み込み放射冷暖房システムを設計する際に考慮すべき快適基準を指定します。 Part 2 では、暖房能力と冷房能力を決定するための定常状態の計算方法について説明します。 Part 3 では、加熱および冷却能力を確保するための放射加熱および冷却システムの設計および寸法決定方法を指定します。 Part 4 では、省エネ目的でサーモ アクティブ ビルディング システム (TABS) を設計するための寸法と計算方法を提供します。これは、輻射冷暖房システムが再生可能エネルギーを使用することでエネルギー消費と熱源のサイズを削減できるためです。 Part 5 では、システムが意図したとおりに動作するためのインストール プロセスについて説明します。 Part 6部では、輻射冷暖房システムが実際に建物内で運用されているときに、設計段階で意図した最大の性能を確保するための、輻射冷暖房システムの適切な制御方法を示します。
序章
輻射冷暖房システムは、放熱・吸熱、熱供給、配電、制御システムから構成されています。 ISO 11855 シリーズは、空間内の熱交換を直接制御する埋め込み式の表面加熱および冷却システムを扱います。熱源、分配システム、コントローラーなどのシステム機器自体は含まれません。
ISO 11855 シリーズは、建物構造に統合された組み込みシステムに対応しています。したがって、建物構造と統合されていないオープンエアギャップを備えたパネルシステムは、このシリーズではカバーされていません。
ISO 11855 シリーズは、加熱媒体または冷却媒体として水だけでなく、他の流体または電気を使用するシステムにも適用されます。
ISO 11855 シリーズの目的は、組み込みシステムを効果的に設計するための基準を提供することです。これを行うために、組み込みシステムが提供するスペースの快適性基準、熱出力の計算、寸法、動的解析、組み込みシステムの設置、操作、および制御方法を提示します。
1 スコープ
ISO 11855 のこの部分では、太陽熱取得、内部熱取得、換気などの熱取得に基づいて、サーモ アクティブ ビルディング システム (TABS) のピーク冷却能力を計算し、水側の冷却電力需要を計算できます。 、チラーのサイズ、流体の流量などに関して、冷却システムのサイズを決定するために使用されます。
ISO 11855 のこの部分では、非定常状態での加熱および冷却能力の計算を目的とした詳細な方法が定義されています。
ISO 11855 シリーズは、住宅、商業、および工業用建物の水ベースの埋め込み型表面暖房および冷房システムに適用できます。この方法は、壁、床、または天井の構造に統合されたシステムに適用され、オープンエアギャップはありません。建物構造に統合されていないオープンエアギャップを備えたパネルシステムには適用されません。
ISO 11855 シリーズは、必要に応じて、加熱または冷却媒体としての水以外の流体の使用にも適用されます。 ISO 11855 シリーズは、システムのテストには適用されません。この方法は、加熱または冷却された天井パネルまたは梁には適用されません。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 11855-1, 建物環境設計 — 組み込み放射暖房および冷房システムの設計、寸法、設置および制御 — Part 1: 定義、記号、および快適性基準
3 用語と定義
このドキュメントでは、ISO 11855-1 の用語と定義が適用されます。
参考文献
| [1] | ISO 7730, 温熱環境のエルゴノミクス — PMV および PPD 指数の計算と局所温熱快適性基準を使用した温熱快適性の分析的決定と解釈 |
| [2] | ISO 11855-2, 建築環境設計 — 組み込み放射暖房および冷房システムの設計、寸法、設置および制御 — Part 2: 設計暖房および冷房能力の決定 |
| [3] | EN 1264-2, 水ベースの表面埋め込み暖房および冷房システム - 床暖房 - 計算および試験方法を使用して熱出力を決定するための方法を証明する |
| [4] | EN 1264-5, 水ベースの表面埋め込み加熱および冷却システム — Part 5: 床、天井、および壁に埋め込まれた加熱および冷却表面 — 熱出力の決定 |
| [5] | EN 15377-1, 建物内の暖房システム — 組み込み水ベースの表面暖房および冷房システムの設計 — Part 1: 設計暖房および冷房能力の決定 |
| [6] | EN 15377-3, 建物内の暖房システム — 組み込み水ベースの表面暖房および冷房システムの設計 — Part 3: 再生可能エネルギー源の使用の最適化 |
| [7] | EN 15251, 室内空気質、熱環境、照明、音響に対応する建物のエネルギー性能の設計と評価のための室内環境入力パラメータ |
| [8] | EN 15255, 建物のエネルギー性能 — 顕熱室内冷房負荷の計算 — 一般的な基準と検証手順 |
| [9] | EN 15265, 建物のエネルギー性能 — 動的手法を使用した暖房と冷房のエネルギー需要の計算 — 一般的な基準と検証手順 |
| [10] | B runello P, D e Carli M, Tonon M, Z ecchin R.さまざまな建物や気候に対する暖房および冷房の熱スラブの適用、ASHRAE Transactions, 2003 |
| [11] | 冷却システム、CIB World Building Congress, 2004 年 5 月 |
| [12] | D eCarli M.、 Koschenz M.、S carpa M.、Z ecchin R.サーモ アクティブ ビルディング システムのサイジングの簡略化された方法(イタリア語)、ATI National Conference, 2003 年 9 月 |
| [13] | Hauser , G., Kempkes , Ch., Olesen , BW各フロア間のコンクリート スラブに埋め込まれたパイプを使用した温水暖房および冷却システムのパフォーマンスのコンピュータ シミュレーション。 ASHRAE Trans. V. 2000, 106, pt.1 |
| [14] | Koschenz 、M.、Lehman, B. Thermoactive component systems tabs 、2000, ISBN 3-905594-19-6 |
| [15] | Meierhans 、RAスラブ冷却およびアース結合、ASHRAE Trans. V. 99, Pt 2, 1993 |
| [16] | Meierhans , RAコンクリートの天井を一晩冷却することによる部屋の空調。 ASHRAE Trans. V. 102, Pt. 1996年2月2日 |
| [17] | Olesen, BW, Sommer , K. およびDüchting , B.動的コンピューター シミュレーションによるスラブ加熱および冷却システムの制御、ASHRAE Trans. V.108 、Pt.2, 2002 |
| [18] | Read O, BW, Dossi , FC Operation and Control of Activated Slab Heating and Cooling Systems , 2004 |
| [19] | O, BW, Koschenz 、M.、J ohansson 、C.組み込み放射面加熱および冷却システムの設計と寸法に関する新しい欧州規格の提案をお読みください。 ASHRAE トランザクション、第 109 巻、 Part 2 部、2003 年 |
| [20] | O read BW, D eCarli M.、 Scarpa M.、 Koschenz M. Thermo Active ビルディング システムの冷却能力の動的評価。 ASHRAE トランザクション、2006 年 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11855-4 was prepared by Technical Committee ISO/TC 205, Building environment design.
ISO 11855 consists of the following parts, under the general title Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems:
- Part 1: Definition, symbols, and comfort criteria
- Part 2: Determination of the design and heating and cooling capacity
- Part 3: Design and dimensioning
- Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
- Part 5: Installation
- Part 6: Control
Part 1 specifies the comfort criteria which should be considered in designing embedded radiant heating and cooling systems, since the main objective of the radiant heating and cooling system is to satisfy thermal comfort of the occupants. Part 2 provides steady-state calculation methods for determination of the heating and cooling capacity. Part 3 specifies design and dimensioning methods of radiant heating and cooling systems to ensure the heating and cooling capacity. Part 4 provides a dimensioning and calculation method to design Thermo Active Building Systems (TABS) for energy-saving purposes, since radiant heating and cooling systems can reduce energy consumption and heat source size by using renewable energy. Part 5 addresses the installation process for the system to operate as intended. Part 6 shows a proper control method of the radiant heating and cooling systems to ensure the maximum performance which was intended in the design stage when the system is actually being operated in a building.
Introduction
The radiant heating and cooling system consists of heat emitting/absorbing, heat supply, distribution, and control systems. The ISO 11855 series deals with the embedded surface heating and cooling system that directly controls heat exchange within the space. It does not include the system equipment itself, such as heat source, distribution system and controller.
The ISO 11855 series addresses an embedded system that is integrated with the building structure. Therefore, the panel system with open air gap, which is not integrated with the building structure, is not covered by this series.
The ISO 11855 series shall be applied to systems using not only water but also other fluids or electricity as a heating or cooling medium.
The object of the ISO 11855 series is to provide criteria to effectively design embedded systems. To do this, it presents comfort criteria for the space served by embedded systems, heat output calculation, dimensioning, dynamic analysis, installation, operation, and control method of embedded systems.
1 Scope
This part of ISO 11855 allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS), based on heat gains, such as solar gains, internal heat gains, and ventilation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards the chiller size, fluid flow rate, etc.
This part of ISO 11855 defines a detailed method aimed at the calculation of heating and cooling capacity in non-steady state conditions.
The ISO 11855 series is applicable to water based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. It does not apply to panel systems with open air gaps which are not integrated into the building structure.
The ISO 11855 series also applies, as appropriate, to the use of fluids other than water as a heating or cooling medium. The ISO 11855 series is not applicable for testing of systems. The methods do not apply to heated or chilled ceiling panels or beams.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 11855-1, Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 1: Definition, symbols, and comfort criteria
3 Terms and definitions
For the purposes of this document, the terms and definitions in ISO 11855-1 apply.
Bibliography
| [1] | ISO 7730, Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| [2] | ISO 11855-2, Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity |
| [3] | EN 1264-2, Water based surface embedded heating and cooling systems — Floor heating — Prove methods for the determination of the thermal output using calculation and test methods |
| [4] | EN 1264-5, Water based surface embedded heating and cooling systems — Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls — Determination of thermal output |
| [5] | EN 15377-1, Heating systems in buildings — Design of embedded water based surface heating and cooling systems — Part 1: Determination of the design heating and cooling capacity |
| [6] | EN 15377-3, Heating systems in buildings — Design of embedded water based surface heating and cooling systems — Part 3: Optimizing for use of renewable energy sources |
| [7] | EN 15251, Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| [8] | EN 15255, Energy performance of buildings — Sensible room cooling load calculation — General criteria and validation procedures |
| [9] | EN 15265, Energy performance of buildings — Calculation of energy needs for space heating and cooling using dynamic methods — General criteria and validation procedures |
| [10] | Brunello P., De Carli M., Tonon M., Zecchin R. Applications of heating and cooling thermal slabs for different buildings and climate, ASHRAE Transactions, 2003 |
| [11] | Cooling Systems, CIB World Building Congress, May 2004 |
| [12] | De Carli M., Koschenz M., Scarpa M., Zecchin R. Simplified method for sizing Thermo Active Building Systems (in Italian), ATI National Conference, September 2003 |
| [13] | Hauser, G., Kempkes, Ch., Olesen, B. W. Computer Simulation of the Performance of a Hydronic Heating and Cooling System with Pipes Embedded into the Concrete Slab between Each Floor. ASHRAE Trans. V. 2000, 106, pt.1 |
| [14] | Koschenz, M., Lehman, B. Thermoaktive Bauteilsysteme tabs, 2000, ISBN 3-905594-19-6 |
| [15] | Meierhans, R.A. Slab cooling and earth coupling, ASHRAE Trans. V. 99, Pt 2, 1993 |
| [16] | Meierhans, R.A. Room air conditioning by means of overnight cooling of the concrete ceiling. ASHRAE Trans. V. 102, Pt. 2, 1996 |
| [17] | Olesen, B.W., Sommer, K. and Düchting, B. Control of slab heating and cooling systems studied by dynamic computer simulations, ASHRAE Trans. V.108, Pt.2, 2002 |
| [18] | Olesen, B.W., Dossi, F.C. Operation and Control of Activated Slab Heating and Cooling Systems, 2004 |
| [19] | Olesen, B. W., Koschenz, M., Johansson, C. New European Standard Proposal for Design and Dimensioning of Embedded Radiant Surface heating and Cooling Systems. ASHRAE Transactions, Volume 109, Part 2, 2003 |
| [20] | Olesen B.W., De Carli M., Scarpa M., Koschenz M. Dynamic evaluation of the cooling capacity of Thermo Active building systems. ASHRAE Transactions, 2006 |