この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。文書の作成中に特定された特許権の詳細は、序論および/または受け取った特許宣言の ISO リストに記載されます ( www.iso.org/patents を 参照)
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易の技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html
この文書は ISO/TC 42, 写真技術委員会によって作成されました。
この第 4 版は、技術的に改訂された第 3 版 (ISO 12233:2017) を廃止し、置き換えるものです。
主な変更点は以下のとおりです。
- 第 6 条および付属書 C では、e-SFR テスト チャートは、水平および垂直の測定に加えて斜めの測定を可能にするために、「傾斜した正方形」フィーチャーを 4 サイクルの「傾斜した星形」フィーチャーに置き換えることによって修正されました。
- 第 6 条および付録 D では、e-SFR アルゴリズムは、Tukey ウィンドウの使用、エッジに適合する 5 次の多項式の使用、およびエッジ角度サンプリングの補正によって修正されています。そのため、測定結果は第 3 版で得られた結果と若干異なる場合があります。
- e-SFR アルゴリズムの手順を明確にするために、第 6 条と付録 D が更新されました。
- 付属書 C では、周囲と明暗のパッチの反射率が明確になりました。
- 付録 J, K, L, および M が追加されました。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 42, Photography.
This fourth edition cancels and replaces the third edition (ISO 12233:2017), which has been technically revised.
The main changes are as follows:
- In Clause 6 and Annex C, the e-SFR test chart has been modified by replacing the “slanted square” features with four-cycle “slanted star” features, to enable diagonal measurements in addition to horizontal and vertical measurements.
- In Clause 6 and Annex D, the e-SFR algorithm has been modified by using a Tukey window, by using a 5th-order polynomial equation to fit the edge, and by correcting for the edge-angle sampling. As a result, the measurement results may be slightly different compared to the results obtained using the 3rd edition.
- Clause 6 and Annex D were updated to clarify the steps in the e-SFR algorithm.
- In Annex C, the reflectances of the surround and the light and dark patches were clarified.
- Annexes J, K, L, and M were added.