この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の作成に使用される手順と、そのさらなる保守を目的とした手順は、ISO/IEC 指令Part 1 部に記載されています。特に、さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令Part 2 部の編集規則に従って起草されました ( www.iso.org/directives を参照)
ISO は、この文書の実装に特許の使用が含まれる可能性があることに注意を促しています。 ISO は、請求された特許権に関する証拠、有効性、または適用可能性に関していかなる立場もとりません。この文書の発行日の時点で、ISO はこの文書の実装に必要となる可能性のある特許の通知を受け取っていません。ただし、実装者は、これが www.iso.org/patents で入手可能な特許データベースから取得できる最新情報を表していない可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
本書で使用されている商号は、ユーザーの便宜のために提供された情報であり、推奨を構成するものではありません。
規格の自主的な性質、適合性評価に関連する ISO 固有の用語と表現の意味、および貿易技術的障壁 (TBT) における世界貿易機関 (WTO) 原則への ISO の準拠に関する情報については、 www.iso.org/iso/foreword.html を参照してください。
この文書は、ISO と CEN 間の技術協力に関する協定 (ウィーン協定) に従って、欧州標準化委員会 (CEN) 技術委員会 CEN/TC 248繊維および繊維製品と協力して、 ISO/TC 38 繊維技術委員会によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 17751-1:2016) を廃止し、置き換えます。
主な変更点は以下のとおりです。
- 3.1, さまざまな種類の特殊動物繊維の入力に関する注記が追加されました。
- 3.5 では、遠位端を示すために、顕微鏡写真の記入に関する注記が図 1 として追加されました。
- 第 5 項のタイトルを「試薬」に変更し、使用した試薬を記載します。
- 第 6 条「装置」が追加され、装置は対応する下位条項番号とともにリストされます。後続の節と副節の番号はそれに応じて変更されます。
- 6.1 および 6.2, 倍率校正のためのステージマイクロメーターの要件が追加されました。
- 6.4 では、メスとダブルブレード用の 2 つの代替装置が追加されました。
- 第 7 条「サンプリング」が追加され、その内容は附属書 A の特性調整と一致するように言い換えられています。
- 第 8 条「コンディショニング」が追加されました。
- 第 9 項が「試験片の準備」として追加されました。
- 9.1 では、試験片の量が増加し、2 つの試験結果に矛盾がある場合に試験するための 3 セット目の試験片の要件が追加されました。
- 9.2のタイトルを「試験片の作製」から「試験片の作製方法」に変更しました。
- 9.2.1.3 では、標本調製に必要ないくつかの補足操作が追加されました。
- 9.2.4.1, 縦糸と横糸の塊のマーキングおよび実験室サンプルに関する欠落情報が補足されました。
- 9.3 では、タイトルが「実験室サンプルの脱色」から「実験室サンプルの前処理」に変更され、ソックスレー抽出の説明がこの節に調整されました。適用される場合、前処理の報告要件が 9.3.1 と 9.3.2 の両方に追加されました。
- 第 10 条は「手順」に名前が変更されました。
- 10.1, 「一般」、その内容が追加され、後続の節の番号が付け直されました。
- 10.3.1.1 では、説明が詳細な操作手順に書き直され、定性テストの説明が追加されました。
- 第 11 条のタイトルを「試験結果の計算」から「試験結果の計算と表現」に変更しました。
- 11.1 および 11.2 とその副節タイトルがそれぞれ追加されました。
- 新しい第 12 条「試験報告書」が追加されました。
- 付属書 A のステータスが参考情報から規範に変更されました。
- 付録 D, 一部の繊維の密度が変更され、粗いウサギの密度が追加されました。
- 付録 D, 粗いウサギに脚注が追加されました。
ISO 17751 シリーズのすべての部品のリストは、ISO の Web サイトでご覧いただけます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 38, Textiles, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 248, Textile and textile products, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 17751-1:2016), which has been technically revised.
The main changes are as follows:
- 3.1, a note to entry of different types of speciality animal fibres has been added;
- 3.5, a note to entry of a micrograph has been added as Figure 1 to indicate the distal edge;
- the title of Clause 5 has been changed to “Reagents” and the reagent used is listed;
- Clause 6, “Apparatus”, has been added and the apparatus are listed with corresponding subclause numbers; subsequent clause and subclause numbers are changed accordingly;
- 6.1 and 6.2, requirement on stage micrometer for calibration of magnification has been added;
- 6.4, two alternative apparatus for scalpel and double blades have been added;
- Clause 7, “Sampling”, has been added and its content is rephrased to match with the property adjustment of Annex A;
- Clause 8, “Conditioning”, has been added;
- Clause 9 has been added as “Preparation of test specimens”;
- 9.1, the amount of test specimens has been increased, together with the requirement for a third set of test specimens to be tested in case of discrepancy on the 2 test results;
- the title of 9.2 has been changed from “Preparation of the test specimens” to “Preparation method for test specimens”;
- 9.2.1.3, some necessary complementary operations on specimen preparation have been added;
- 9.2.4.1, missing information on marking of masses of warp and weft yarns and on laboratory sample has been supplemented;
- 9.3, the title has been changed from “Decolouring of the laboratory sample” to “Pre-treatment of the laboratory sample”, and the Soxhlet extraction description has been adjusted into this subclause. The requirement of reporting of pre-treatment, if applied, has been added in both 9.3.1 and 9.3.2;
- Clause 10 has been renamed as “Procedure”;
- 10.1, “General”, and its content has been added, the subsequent subclauses have been renumbered;
- 10.3.1.1, the description has been rewritten to elaborate operation procedures and qualitative test descriptions have been added;
- the title of Clause 11 has been changed from “Calculation of test result” to “Calculation and expression of test result”;
- 11.1 and 11.2 and their subclause titles have been added, respectively;
- a new Clause 12, Test report, has been added;
- the status of Annex A has been changed from informative to normative;
- Annex D, density of some fibres has been modified and the density of coarse rabbit has been added;
- Annex D, a footnote has been added to coarse rabbit.
A list of all parts in the ISO 17751 series can be found on the ISO website.