この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 4365 は、技術委員会 ISO/TC 113, Hydrometry 、Subcommittee SC 6, Sediment transportによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 4365:1985) を取り消して置き換えるものです。
序章
沈降と堆積物輸送の問題に対処する際には、粒子サイズ分布や相対密度などの堆積物の濃度と特性に関する知識が非常に重要です。この目的のために、堆積物サンプルは適切なサンプラーによって収集され、実験室で分析されます。分析の結果は、土砂負荷、平均直径、およびその他の特性の計算に使用されます。
1 スコープ
この国際規格は、小川および運河の堆積物の濃度、粒子サイズ分布、および相対密度を決定する方法を指定しています。
注記分析の詳細な方法は、付属書に記載されています。附属書 A, B および C は、蒸発およびろ過による懸濁堆積物濃度の測定を扱っています。附属書 D および E は、懸濁堆積物の粒子サイズ分析を扱い、それぞれ掃流砂と堆積物堆積物の手順の概要を示しています。附属書 F は堆積物の相対密度の決定を扱い、附属書 G は粒度分布特性の決定を扱います。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントの目的のために、ISO 772 および以下に記載されている用語と定義が適用されます。
3.1
ベッドロード
転がり、すべり、またはホッピングによって前方に運ばれる、層とほぼ連続的に接触している堆積物。
3.2
ベッド素材
河床を構成する堆積物
3.3
ベッド材料負荷
移動速度が水路の輸送能力によって支配される河床材料からなる、輸送される総堆積物の一部。
3.4
呼び径
与えられた粒子と同じ体積の球の直径
3.5
投影直径
最大安定面で見たときの粒子の投影像を囲む最小の円の直径
3.6
底質濃度
水と堆積物の混合物中の乾燥した堆積物の質量または体積と、懸濁液の総質量または体積との比率。
注記 1報告の際には、質量濃度または体積濃度のどちらを報告するかを記載する必要があります。
3.7
沈降径
同じ沈降流体中の特定の粒子と同じ相対密度と最終沈降速度を持つ球の直径
3.8
ふるいの直径
指定された粒子がちょうど通過する正方形の開口部の幅
3.9
相対密度
与えられた体積の堆積物の質量と等しい体積の水の質量との比
3.10
吊り荷
輸送された総堆積物の一部で、流水中の乱流によってかなりの期間、河床と接触することなく懸濁状態に維持される部分
注記1堆積物は流水の速度と実質的に同じ速度で移動する。一般に、単位時間あたりの質量または体積として表されます。
参考文献
| [1] | 化学と物理学のCRCハンドブック、エド。 Robert C. Weast およびアソシエイト エディター Malvin J. Astle, 出版物: CRC Press Inc.、フロリダ州、米国 注異なる温度での水の粘度と密度の値について。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4365 was prepared by Technical Committee ISO/TC 113, Hydrometry, Subcommittee SC 6, Sediment transport.
This second edition cancels and replaces the first edition (ISO 4365:1985), which has been technically revised.
Introduction
In dealing with problems of sedimentation and sediment transport, knowledge of the concentration and the characteristics of the sediment, such as particle size distribution and relative density, is of great importance. For this purpose, sediment samples are collected by suitable samplers and analysed in a laboratory. The results of the analysis are used in the calculation of sediment load, mean diameter and other characteristics.
1 Scope
This International Standard specifies methods for determining the concentration, particle-size distribution and relative density of sediment in streams and canals.
NOTE The detailed methods of analysis are set out in the annexes. Annexes A, B and C deal with the determination of the suspended sediment concentration by evaporation and filtration. Annexes D and E deal with the particle-size analysis of suspended sediment and outline the procedures for the bed-load and bed material sediment, respectively. Annex F deals with the determination of the relative density of sediment and Annex G with the determination of particle size distribution characteristics.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 772, Hydrometric determinations — Vocabulary and symbols
- ISO 4363, Measurement of liquid flow in open channels — Methods for measurement of characteristics of suspended sediment
- ISO 4364, Measurement of liquid flow in open channels — Bed material sampling
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO 772 and the following apply.
3.1
bed-load
sediment in almost continuous contact with the bed, carried forward by rolling, sliding or hopping
3.2
bed material
sediment of which the stream bed in composed
3.3
bed material load
that part of the total sediment transported consisting of the bed material whose rate of movement is governed by the transporting capacity of the channel
3.4
nominal diameter
diameter of a sphere of the same volume as the given particle
3.5
projected diameter
diameter of the smallest circle that encloses the projected image of a particle when viewed in the plane of maximum stability
3.6
sediment concentration
ratio of the mass or volume of dry sediment in a water-sediment mixture to the total mass or volume of the suspension
Note 1 to entry: When reporting, it is necessary to mention whether mass concentration or volume concentration is reported.
3.7
sedimentation diameter
diameter of a sphere having the same relative density and terminal settling velocity as a given particle in the same sedimentation fluid
3.8
sieve diameter
width of a square opening through which the given particles will just pass
3.9
relative density
ratio of the mass of a given volume of sediment to the mass of an equal volume of water
3.10
suspended load
that part of the total sediment transported which is maintained in suspension by turbulence in the flowing water for considerable periods of time without contact with the streambed
Note 1 to entry: The sediment moves practically with the same velocity as that of the flowing water. It is generally expressed as a mass or volume per unit of time.
Bibliography
| [1] | CRC Handbook of Chemistry and Physics, Ed. Robert C. Weast and Associate Editor Malvin J. Astle, Publication: CRC Press Inc., Florida, USA NOTE For viscosity and density values of water at different temperatures. |