この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
技術革新の初期段階における標準化の問題に関する世界的な協力の必要性に応えるため、ISO 評議会は、技術動向に関する ISO/IEC 会長諮問委員会の勧告に従い、「技術動向」という名前の ISO 出版物の新しいシリーズを設立することを決定しました。評価」(ISO/TTA)これらの出版物は、標準化前の組織との直接協力、または標準化のニーズと新興分野の傾向に関係する専門家の臨時ワークショップの結果です。
したがって、技術トレンド評価は標準化前の作業または研究の結果です。 ISO による発行の条件として、ISO/TTA は既存の国際規格または国際規格草案 (DIS) と矛盾してはなりませんが、通常は標準化の基礎となる情報を含まなければなりません。 ISO は、進行中の事前標準化作業の目標と研究開発環境における新しい取り組みの目標の調和を促進するために、このような文書を発行することを決定しました。これらの刊行物は、市場参入前の技術選択の合理化に貢献することを目的としています。 ISO/TTA は標準ではありませんが、将来、既存のさまざまな標準化機関による標準開発の基礎として使用できるようにすることを目的としています。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO/TTA 5 は VAMAS TWA25 によって作成され、ISO と VAMAS の間で締結された覚書に基づいて発行されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO/TTA 5:2006) を廃止し、置き換えます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
To respond to the need for global collaboration on standardization questions at early stages of technological innovation, the ISO CounciI, following recommendations of the ISO/IEC Presidents' Advisory Board on Technological Trends, decided to establish a new series of ISO publications named 'Technology Trends Assessments' (ISO/TTA). These publications are the results of either direct cooperation with prestandardization organizations or ad hoc Workshops of experts concemed with standardization needs and trends in emerging fields.
Technology Trends Assessments are thus the result of prestandardization work or research. As a condition of publication by ISO, ISO/TTAs shall not conflict with existing International Standards or draft International Standards (DIS), but shall contain information that would normally form the basis of standardization. ISO has decided to publish such documents to promote the harmonization of the objectives of ongoing prestandardization work with those of new initiatives in the Research and Development environment. It is intended that these publications will contribute towards rationalization of technological choice prior to market entry. Whilst ISO/TTAs are not Standards, it is intended that they will be able to be used as a basis for standards development in the future by the various existing standards agencies.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TTA 5 was prepared by VAMAS TWA25 and published under a memorandum of understanding concluded between ISO and VAMAS.
This second edition cancels and replaces the first edition (ISO/TTA 5:2006), which has been technically revised.