この規格ページの目次
5
B 2356-2 : 2000 (ISO 9974-2 : 1996)
付表2 エラストマシール(タイプE)による中圧用(Lシリーズ)及び高圧用(Sシリーズ)継手部の圧
力
シリーズ ねじ 最高使用圧力 試験圧力
破壊圧力 衝撃圧力(4)
MPa MPa MPa
L M10×1 25 100 33.2
M12×1.5 25 100 33.2
M14×1.5 25 100 33.2
M16×1.5 25 100 33.2
M18×1.5 25 100 33.2
M22×1.5 16 64 21.3
M26×1.5 16 64 21.3
M33×2 10 40 13.3
M42×2 10 40 13.3
M48×2 10 40 13.3
S M12×1.5 63 252 83.8
M14×1.5 63 252 83.8
M16×1.5 63 252 83.8
M18×1.5 63 252 83.8
M20×1.5(3) 63 252 83.8
M22×1.5 40 160 53.2
M27×2 40 160 53.2
M33×2 40 160 53.2
M42×2 25 100 33.2
M48×2 25 100 33.2
注(3) 計測用にだけ適用
(4) 衝撃圧力試験
備考 圧力は7.の規定によって試験して,決定された。
付図2 中圧用(Lシリーズ)及び高圧用(Sシリーズ)継手端部用エラストマシール
――――― [JIS B 2356-2 pdf 6] ―――――
6
B 2356-2 : 2000 (ISO 9974-2 : 1996)
付表3 中圧用(Lシリーズ)及び高圧用(Sシリーズ) 付表4 継手端部の品質確認をする
継手端部用エラストマシール寸法 場合の締付けトルク値
付図3 継手端部,エラストマシールを正しく装着した状態
――――― [JIS B 2356-2 pdf 7] ―――――
7
B 2356-2 : 2000 (ISO 9974-2 : 1996)
附属書A(規定) ポート及び継手端部の試験成績書様式
――――― [JIS B 2356-2 pdf 8] ―――――
8
B 2356-2 : 2000 (ISO 9974-2 : 1996)
附属書B(参考) 参考文献
[1] JIS B 0401-2 : 1998 寸法公差及びはめあいの方式−第2部 : 穴及び軸の公差等級並びに寸法許容差の
表
備考 ISO 286-2 : 1988, ISO system of limits and fits−Part 2 : Tables of standard tolerance grades and limit
deviations for holes and shaftsが,この規格と一致している。
[2] JIS B 0021 : 1998 製品の幾何特性仕様 (GPS) −幾何公差表示方式−形状,姿勢,位置及び振れの公
差表示方式
備考 ISO 1101 : 1983, Technical drawings-Geometrical tolerancing−Tolerances of form, orientation,
location, and run-out−Generalities, definitions, symbols, indications on drawingsが,この規格と一致
している。
[3] JIS B 0031 : 1994 製図−面の肌の図示方法
備考 ISO 1302 : 1992, Technical drawings−Method of indicating surface texture on drawingsからの引用事
項は,この規格の該当事項と同等である。
[4] JIS B 0002-1 : 1998 製図−ねじ及びねじ部品−第1部 : 通則
備考 ISO 6410-1 : 1993, Technical drawings−Screw threads and threaded parts−Part 1 : General
conventionsが,この規格と一致している。
[5] ISO 1179-1 : −(1), Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
with elastomeric or metal-to-metal sealing−Part 1 : Threaded ports
[6] ISO 1179-2 :−(1), Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
with elastomeric or metal-to-metal sealing−Part 2 : Heavy-duty (S series) nd light-duty (L series) tud ends
with elastomeric sealing (type E)
[7] ISO 1179-3 : −(1), Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
with elastomeric or metal-to-metal sealing−Part 3 : Light-duty (L series) tud ends with sealing by O-ring with
retaining ring (types G and H)
[8] ISO 1179-4 : −(1), Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
with elastomeric or metal-to-metal sealing−Part 4 : Stud ends for use only metal-to-metal sealing (Type B)
[9] ISO 6149-1 : 1993, Connections for fluid power and general use−Ports and stud ends with ISO 261 threads
and O-ring sealing−Part 1 : Ports with O-ring seal in truncated housing
[10] ISO 6149-2 : 1993, Connections for fluid power and general use−Ports and stud ends with ISO 261 threads
and O-ring sealing−Part 2 : Heavy duty (S series) tud ends−Dimensions, design, test methods and
requirements
[11] ISO 6149-3 : 1993, Connections for fluid power and general use−Ports and stud ends with ISO 261 threads
and O-ring sealing−Part 3 : Light-duty (L-series) tud ends−Dimensions, design, test methods and
requirements
[12] ISO 8434-1 : 1994, Metalic tube connections for fluid power and general use−Part 1 : 24 degree compression
fittings
[13] ISO 8434-4 : 1995, Metalic tube connections for fluid power and general use−Part 4 : 24 degree cone
――――― [JIS B 2356-2 pdf 9] ―――――
9
B 2356-2 : 2000 (ISO 9974-2 : 1996)
connec-tions with O-ring weld-on nipples
[14] ISO 9974-1 : 1996, Connections for general use and fluid power−Ports and stud ends with ISO 261 threads
with elastomeric or metal-to-metal sealing−Part 1 : Threaded port
[15] ISO 9974-3 : 1996, Connections for general use and fluid power−Ports and stud ends with ISO 261 threads
with elastomeric or metal-to-metal sealing−Part 3 : Stud ends with metal-to-metal sealing (Type B)
[16] ISO 11926-1 : 1995, Connections for general use and fluid power−Ports and stud ends with ISO 725 threads
and O-ring sealing−Part 1 : Ports with O-ring seal in truncated housing
[17] ISO 11926-2 : 1995, Connections for general use and fluid power−Ports and stud ends with ISO 725 threads
and O-ring sealing−Part 2 : Heavy-duty (S series) tud ends
[18] ISO 11926-3 : 1995, Connections for general use and fluid power−Ports and stud ends with ISO 725 threads
and O-ring sealing−Part 3 : Light-duty (L series) tud ends
[19] DIN 3852-1 : 1992, Stud end and tapped holes, with metric fine pitch thread, for use with compression
couplings, valves and screw plugs-Dimensions
注(1) 発行予定
JIS原案作成本委員会 構成表
氏名 所属
(委員長) 竹 中 俊 夫 東京工業大学名誉教授
(委員) 香 川 利 春 東京工業大学
藤 田 昌 弘 通商産業省
八 田 勲 工業技術院
橋 本 進 財団法人日本規格協会
村 井 孝 宣 財団法人機械振興協会
小 林 隆 博 株式会社神戸製鋼所
渡 並 直 トヨタ自動車株式会社
荒 木 義 昭 株式会社日平トヤマ
岡 安 英 雄 社団法人日本工作機械工業会
黒 部 昌 徳 東芝機械株式会社
藤 田 勝 石川島汎用機械株式会社
美濃越 昌 二 日本電気株式会社
久々湊 哲 夫 SMC株式会社
小曽戸 博 内田油圧機器工業株式会社
中 西 康 二 黒田精工株式会社
長 岐 忠 則 黒田精工株式会社
千 葉 誠 カヤバ工業株式会社
門 泰 一 太陽鉄工株式会社
石 井 進 内田油圧機械工業株式会社
山 崎 一 彦 山信工業株式会社
高 橋 克 彰 SMC株式会社
萩 原 正 治 SMC株式会社
根 本 圭 介 三菱電線工業株式会社
伊 藤 三 郎 株式会社コガネイ
竹 内 俊 一 オリオン機械株式会社
小 池 一 夫 イハラサイエンス株式会社
(事務局) 三 浦 吉 成 社団法人日本フルードパワー工業会
堀 切 俊 彦 社団法人日本フルードパワー工業会
――――― [JIS B 2356-2 pdf 10] ―――――
次のページ PDF 11
JIS B 2356-2:2000の引用国際規格 ISO 一覧
- ISO 9974-2:1996(IDT)
JIS B 2356-2:2000の国際規格 ICS 分類一覧
- 23 : 一般的に利用される流体システム及びその構成要素 > 23.100 : 流体動力システム > 23.100.40 : 配管及びカップリング
- 23 : 一般的に利用される流体システム及びその構成要素 > 23.040 : パイプライン部品及びパイプライン > 23.040.40 : 金属継手
JIS B 2356-2:2000の関連規格と引用規格一覧
- 規格番号
- 規格名称
- JISB0142:2011
- 油圧・空気圧システム及び機器―用語
- JISB0207:1982
- メートル細目ねじ
- JISB1021:2003
- 締結用部品の公差―第1部:ボルト,ねじ,植込みボルト及びナット―部品等級A,B及びC
- JISK2001:1993
- 工業用潤滑油―ISO粘度分類
- JISK6253:2006
- 加硫ゴム及び熱可塑性ゴム―硬さの求め方
- JISK6330-8:1998
- ゴム及び樹脂ホース試験方法―第8部:衝撃圧力試験