JIS B 2356-2:2021 油圧・空気圧用及び一般用途用金属製管継手―エラストマシール又はエッジシールによるメートルねじポート及び継手端部―第２部：エラストマシール（タイプＥ）による継手端部 | ページ 3

                                                                                             9
                                                                 B 2356-2 : 2021 (ISO 9974-2 : 1996)
                                          附属書A
                                          (規定)
                        ポート及び継手端部の試験成績書様式
  ポート及び継手端部の試験成績書は,表A.1による。
                             表A.1−ポート及び継手端部の試験成績書
    継手端部の仕様
                                                          試験設備 :  ...................................................
  メーカ名 :  ................................................................................................
                                                            サイズ :  .......................................................
  継手端部の形式 :  .....................................................................................
                                                       MPa
  最小引張強さ :  .................................................................................
                                                       MPa
  継手端部の最高使用圧力(表2) :  ..................................................
                                                       MPa
  継手端部の衝撃圧力(表2) :  .........................................................
                                                       MPa
  継手端部の破壊圧力 :  ......................................................................
                                                       N·m
  適合性確認用の締付けトルク(表4) :  ..........................................
  破壊圧力試験結果(供試品数3個)
         試料No.           破壊圧力          トルク            硬さ           破壊状況
  1 .........................
                                     MPa
     ....................................             N·m .................................
                                          ........................           ................................
  2 .........................
                                     MPa
     ....................................             N·m .................................
                                          ........................           ................................
  3 .........................
                                     MPa
     ....................................             N·m .................................
                                          ........................           ................................
  衝撃圧力試験結果(供試品数6個)
         試料No.         破壊サイクル数      トルク            硬さ           破壊状況
  1 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  2 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  3 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  4 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  5 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  6 .................................
     ....................................            N·m .................................
                                         ........................           ................................
  結論 :  ...................................................................................................................................................................................
  寸法上の例外事項 :  ............................................................................................................................................................
  報告者名及び署名 :  ............................................................................................................................................................
                                                            日付 .............................................................

――――― [JIS B 2356-2 pdf 11] ―――――

           10
B 2356-2 : 2021 (ISO 9974-2 : 1996)
                                          附属書B
                                          (参考)
                                          参考文献
[1] JIS B 0002-1:1998 製図−ねじ及びねじ部品−第1部 : 通則
      注記 対応国際規格における参考文献 : ISO 6410-1:1993,Technical drawings−Screw threads and
            threaded parts−Part 1: General conventions
[2] JIS B 0021:1998 製品の幾何特性仕様(GPS)−幾何公差表示方式−形状,姿勢,位置及び振れの公差
    表示方式
      注記 対応国際規格における参考文献 : ISO 1101:1983,Technical drawings−Geometrical tolerancing−
            Tolerances of form, orientation, location, and run-out−Generalities, definitions, symbols, indications
            on drawings
[3] JIS B 0031:2003 製品の幾何特性仕様(GPS)−表面性状の図示方法
      注記 対応国際規格における参考文献 : ISO 1302:2002,Geometrical Product Specifications (GPS)−
            Indication of surface texture in technical product documentation
[4] ISO 1179-1:2013,Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
    with elastomeric or metal-to-metal sealing−Part 1: Threaded ports
[5] ISO 1179-2:2013,Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
    with elastomeric or metal-to-metal sealing−Part 2: Heavy-duty (S series)   nd light-duty (L series)   tud ends with
    elastomeric sealing (type E)
[6] ISO 1179-3:2007,Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
    with elastomeric or metal-to-metal sealing−Part 3: Light-duty (L series)   tud ends with sealing by O-ring with
    retaining ring (types G and H)
[7] ISO 1179-4:2007,Connections for general use and fluid power−Ports and stud ends with ISO 228-1 threads
    with elastomeric or metal-to-metal sealing−Part 4: Stud ends for use only metal-to-metal sealing (Type B)
[8] ISO 6149-1:2019,Connections for hydraulic fluid power and general use−Ports and stud ends with ISO 261
    metric threads and O-ring sealing−Part 1: Ports with truncated housing for O-ring seal
[9] ISO 6149-2:2006,Connections for fluid power and general use−Ports and stud ends with ISO 261 threads and
    O-ring sealing−Part 2: Heavy duty (S series)   tud ends−Dimensions, design, test methods and requirements
[10] ISO 6149-3:2006,Connections for fluid power and general use−Ports and stud ends with ISO 261 threads and
    O-ring sealing−Part 3: Light-duty (L-series)   tud ends−Dimensions, design, test methods and requirements
[11] ISO 8434-1:2018,Metallic tube connections for fluid power and general use−Part 1: 24° cone connectors
[12] ISO 9974-1:1996,Connections for general use and fluid power−Ports and stud ends with ISO 261 threads with
    elastomeric or metal-to-metal sealing−Part 1: Threaded port
[13] ISO 9974-3:1996,Connections for general use and fluid power−Ports and stud ends with ISO 261 threads with
    elastomeric or metal-to-metal sealing−Part 3: Stud ends with metal-to-metal sealing (Type B)
[14] ISO 11926-1:1995,Connections for general use and fluid power−Ports and stud ends with ISO 725 threads and
    O-ring sealing−Part 1: Ports with O-ring seal in truncated housing
[15] ISO 11926-2:1995,Connections for general use and fluid power−Ports and stud ends with ISO 725 threads and
    O-ring sealing−Part 2: Heavy-duty (S series)   tud ends

――――― [JIS B 2356-2 pdf 12] ―――――

                                                                                            11
                                                                 B 2356-2 : 2021 (ISO 9974-2 : 1996)
[16] ISO 11926-3:1995,Connections for general use and fluid power−Ports and stud ends with ISO 725 threads and
    O-ring sealing−Part 3: Light-duty (L series)   tud ends
[17] DIN 3852-1:2014,Stud ends and ports of fittings, valves and plug screws−Part 1: Dimensions for metric fine
    pitch thread