JIS K 6935-2:1999 プラスチック―ふっ素ポリマーのディスパージョン，成形用及び押出用材料―第２部：試験片の作り方及び諸特性の求め方 | ページ 10

                                                                                             43
                                                                                  K 6935-2 : 1999
                                附属書C(参考)         目録
[1] ISO 976 : (1986), Rubber and plastics−Polymer dispersions and rubber latices−Determination of PH
[2] ISO 4576 : (1978), Plastics−Polymer dispersions−Determination of sieveres residue (gross particle and
    coagulum conknt)
[3] ASTM C690-86 (1992), Test method for particle size distribution of alumina or quartz by electric sensing
    techniques
[4] ASTM D149-93a Test methods for dielectric Breakdown voltage and dielectric strength of solid electrical
    insulat-ing materials at commercial power frequencies.
[5] ASTM D150-93 Test methods for A-C loss Characteristics and permittivity (dielectric constant)   f solid
    electrical insulating materials.
[6] ASTM D638M-93 Test method for tensile properties of Plastics (metric)
[7] ASTM D790M-92 Test methods for flexural Properties of unreinforced and reinforced plastics and electrical
    insulating materials (Metric)
[8] ASTM D1238-90b Test method for flow rates of thermoplastics by extrusion plastometer.
[9] ASTM D1430-91a Specification for polychlorotrifluoroethylene (PCTFE)   lastics.
[10] ASTM D1457-91a Specification for PTFE molding and extrusion materials.
[11] ASTM D1898-68 (1989), Practice for sampling of plastics
[12] ASTM D2116-91a Specification for FEP fluorocarbon molding and extrusion materials
[13] ASTM D2863-87 Test method for measuring the minimum oxygen concentration to support candle-like
    combustion of plastics (oxygen index) .
[14] ASTM D2902-85 (1990), Specification for fluoropolymer resin heat-shrinkable tubing.
[15] ASTM D3159-91a Specification for modified ETFE fluoropolymer molding and extrusion materials.
[16] ASTM D3222-91a Specification for unmodified poly (vinylidene Fluoride) (PYDE)   olding and extrusion and
    coating materials.
[17] ASTM D3275-91a Specification for E−CTFE fluoroplastic Molding, extrusion and coating materials.
[18] ASTM D3307-93 Specification for PFA fluorocarbon molding and extrusion materials.
[19] ASTM D3892-93 Practice for packaging/packing of plastics.
[20] ASTM D4052-91 Test method for density and relative density of liquids by digital density meter.
[21] ASTM D4438-85 (1991)   est method for particle size distribution of catalytic material by electronic counting
[22] ASTM D4441-91b Specification for dispersions of polytetrafluoroethylene.
[23] ASTM D4591-93a Test Method for determining temperatures and heats of transitions of fluoropolymers by
    differential scanning calorimetry.
[24] ASTM D4894-91a Specification for polytetrafluoroethy lene (PTFE)   ranular molding and ram extrusion
    materials.
[25] ASTM D4895-91a Specification for polytetrafluoroethylene (PTFE)   esins produced from dispersion.
[26] ASTM E11-87, Specification for wire-cloth sieves for testing purposes

――――― [JIS K 6935-2 pdf 46] ―――――

44
K 6935-2 : 1999
[27] ASTM F660-83 (1993)   ractice for comparing particle size in the use of alternative types of particle counters
[28] ASTM F662-86 Method for measurement of particle and size distribution in batch samples for filter evaluation
    using an electrical resistance particle counter.
[29] ASTM F751-83 (1993), Method for measuring particle size of wide size range dry toners.
[30] BS6564 : Part 1 : Section 1.1 : 1989, Polytetrafluoroethylene (PTFE)   aterials and pronducts-part 1 :
    Polytetrafluoroethylene powders for moulding and extrusion−Section 1.1 : Specification
[31] BS6564 : Part1 : Section 1.2 : 1989, Polytetrafluoroethylene (PTFE)   aterials and products−Part 1 :
    Polytetrafluoroethylene powders for moulding and extrusion−Section 1.2 : Method of specifying.
[32] BS7485 : 1991, Method of specifying aqueous dispersions of polytetrafluoroethylene (PTFE)   aterials.
[33] JIS K 6891-1977, Testing methods for polytetrafluoroethylene molding powder.
四ふっ化エチレン樹脂成形粉試験方法
[34] JIS K 6892-1976, Testing methods for polytetrafluoroethylene powder for paste extrusion.
四ふっ化エチレン樹脂ペースト押出成形粉試験方法
[35] JIS K 6893-1976, Testing methods for polytetrafluoroethylene aqueous dispersion.
四ふっ化エチレン樹脂ディスパージョン試験方法