この規格ページの目次
43
A 1481-5 : 2021 (ISO 22262-3 : 2016)
E.2.2 試験試料を使用した試験室間試験結果及び測定の不確かさの評価
試験試料は,既知量のクリソタイルを,マトリックスとして使う長石(微斜長石)粉末と混合して調製
した。試験試料用の微斜長石は,実際のバルク材のマトリックスを削減した後,通常残るマトリックス成
分のX線質量吸係数をシミュレートするために選択した。建材にマトリックス質量低減法を適用する場
合,ロックウール,セメント,炭酸カルシウムなどの一部の成分は,ぎ酸処理で溶解する。主な残留鉱物
は,石英,けい酸塩鉱物及び一部の非晶質物質と思われる。これらの残留物のX線質量吸収係数は,溶解
するセラミック又は炭酸カルシウムのものより小さく,けい酸塩鉱物のものと同程度である。そのため,
これらのけい酸塩鉱物を代表するマトリックスとしてふさわしい長石(微斜長石)が選択された。
0.1 mg,0.2 mg,0.5 mg,1.0 mg及び2.0 mgのクリソタイルをそれぞれ10 mgの微細粉末と混合し,こ
れらの混合物をXRD測定するためにフィルタに移した。これらの試料ではマトリックス削減方法が効果
的でなく,試料の残さ(渣)が100 %[例えば,残さ(渣)率100 %]残っている状況をシミュレートする
ために,マトリックス削減は使用しなかった。これらの5個の試験試料を,三つの試験所において,それ
ぞれ5回測定した。不確かさを計算する統計的方法及び試験室間の試験結果を表E.3及び表E.4に示す。
表E.3−X線回折による試験試料の測定結果
濃度水準(j) 試験所(i)
(mg/10 mg) 1 2 3
0.1 0.11 0.07 0.12
0.09 0.08 0.10
0.10 0.08 0.10
0.11 0.08 0.12
0.09 0.06 0.11
0.2 0.21 0.17 0.18
0.18 0.16 0.16
0.24 0.17 0.17
0.21 0.16 0.16
0.26 0.18 0.18
0.5 0.59 0.47 0.45
0.59 0.47 0.46
0.54 0.43 0.44
0.63 0.48 0.46
0.62 0.45 0.45
1.0 1.11 0.84 0.93
1.13 0.92 0.98
1.18 0.96 1.03
1.14 0.89 0.97
1.23 0.95 1.05
2.0 2.09 1.73 1.84
2.26 1.77 1.85
2.17 1.85 1.95
2.44 1.96 2.04
2.23 1.78 1.84
――――― [JIS A 1481-5 pdf 46] ―――――
44
A 1481-5 : 2021 (ISO 22262-3 : 2016)
表E.4−試験試料の測定による推定標準不確かさの結果
濃度水準 平均値 再現性 試験所間の 標準不確かさ 拡張不確かさ
(i) (mg/10 mg) 標準偏差 ばらつき u(i) U(i)
(mg/10 mg) (mg/10 mg) (mg/10 mg) (mg/10 mg)
1 0.09 0.010 0.015 0.020(20 %) 0.040(44 %)
2 0.19 0.019 0.024 0.034(18 %) 0.068(36 %)
3 0.50 0.024 0.065 0.079(16 %) 0.158(31 %)
4 1.02 0.048 0.102 0.128(13 %) 0.255(25 %)
5 1.99 0.105 0.181 0.234(12 %) 0.468(24 %)
質量分率が0.1 mg/10 mg(1 %)2 mg/10 mg(20 %)の範囲内では,標準不確かさは12 %20 %と推
定される。質量分率が0.1 mg/10 mg(1 %)2 mg/10 mg(20 %)の範囲内では,95 %拡張不確かさは,
24 %44 %と推定される。
――――― [JIS A 1481-5 pdf 47] ―――――
45
A 1481-5 : 2021 (ISO 22262-3 : 2016)
参考文献
[1] Klug, H.P., Alexander, L.E. “X-ray Diffraction Procedures for Polycrystalline and Amorphous Materials”, 2nd
Edition, John Wiley & Sons, Inc., New York, 1974, pp. 966.
[2] Cullity, B.D. “Elements of X-ray Diffraction”, 2nd Edition, Addison-Wesley Publishing Company, Inc.,
Massachusetts, 1978, pp. 555.
[3] Leroux, J., Lennox, D.H., Kay, K. Direct quantitative X-ray analysis by diffraction-absorption technique, Anal.
Chem. 1953, 25, 740-743.
[4] Williams, P.P. Direct quantitative diffractometric analysis, Anal. Chem. 1959, 31, 1842-1844.
[5] Leroux, J, Powers, C.A. Quantitative roentgenographische analyse von quartz in staubproben auf
sibermembranfiltern (with English summary), Staub-Reinhalt Luft 1969, 29, 197-200.
[6] Leroux, J., Davey, A.B.C., Parland, A. Proposed standard methodology for the evaluation of silicosis hazards,
Am. Ind. Hyg. Assoc. J. 1973, 34, 409-417.
[7] Altree-Williams, S. Quantitative X-ray diffractometry on microgram samples prepared on silver filters, Anal.
Chem.1977, 49, 429-432.
[8] Altree-Williams, S., Lee, J., Mezin, N.V. Quantitative X-ray diffractometry on respirable dust collected on
Nuclepore filters, Ann. Occup. Hyg. 1977, 20, 109-126.
[9] Lange, B.A., Haartz, J.C. Determination of microgram quantities of asbestos by X-ray diffraction: Chrysotile in
thin dust layers of matrix material, Anal. Chem. 1979, 51, 520.
[10] Kohyama, N. Quantitative X-ray diffraction analysis for airborne asbestos dust in industrial environment: Part I;
Application of X-ray absorption correction method, Industrial Health 1980, 18, 69-87.
[11] Kohyama, N. A new X-ray diffraction method for the quantitative analysis of free silica in the airborne dust in
working environment, Industrial Health 1985, 23, 221-234.
[12] NIOSH method 9000 (1984) Chrysotile asbestos, 9000-1/7.
[13] NIOSH method 7500 (1984) Silica, crystalline, respirable, 7500-1/10.
[14] EPA Test Method (1993) Method for the determination of asbestos in bulk building materials, EPA/600/R-93/116.
[15] JIS A 1481-3:2014 建材製品中のアスベスト含有率測定方法−第3部 : アスベスト含有率のX線回折
定量分析方法
[16] ISO/IEC Guide 98-3:2008,Uncertainty of measurement−Part 3: Guide to the expression of uncertainty in
measurement (GUM:1995)
[17] ISO 20988:2007,Air quality−Guidelines for estimating measurement uncertainty
[18] ISO 5725-2,Accuracy (trueness and precision) of measurement methods and results−Part 2: Basic methods for
the determination of the trueness of a standard measurement method
[19] Meeker, G.P., Bern, A.M., Brownfield, I.K., Lowers, H.A., Sutley, S.J., Hoeffen, T.M., Vance, J.S., The
composition and morphology of amphiboles from The Rainy Creek Comples, Near Libby, Montana. Am. Mineral.
2003, 88, pp.1955-1969
[20] ISO 13794:1999,Ambient air−Determination of asbestos fibres−Indirect-transfer transmission electron
microscopy method
JIS A 1481-5:2021の引用国際規格 ISO 一覧
- ISO 22262-3:2016(IDT)
JIS A 1481-5:2021の国際規格 ICS 分類一覧
- 13 : 環境.健康予防.安全 > 13.040 : 気質 > 13.040.20 : 雰囲気
JIS A 1481-5:2021の関連規格と引用規格一覧
- 規格番号
- 規格名称
- JISA1481-1:2016
- 建材製品中のアスベスト含有率測定方法―第1部:市販バルク材からの試料採取及び定性的判定方法
- JISA1481-4:2016
- 建材製品中のアスベスト含有率測定方法―第4部:質量法及び顕微鏡法によるアスベストの定量分析方法