14
B 0661 : 2020 (ISO 14638 : 2015)
参考文献
[1] JIS B 0021 製品の幾何特性仕様(GPS)−幾何公差表示方式−形状,姿勢,位置及び振れの公差表示
方式
注記 対応国際規格 : ISO/DIS 1101:1996,Geometrical product specifications (GPS)−Geometrical
tolerancing−Tolerances of form, orientation, location and run-out
[2] ISO 5459,Geometrical product specifications (GPS)−Geometrical tolerancing−Datums and datum systems
注記 対応日本産業規格 : JIS B 0022 幾何公差のためのデータム
[3] JIS B 0023 製図−幾何公差表示方式−最大実体公差方式及び最小実体公差方式
注記 対応国際規格 : ISO 2692:2006,Geometrical product specifications (GPS)−Geometrical tolerancing
−Maximum material requirement (MMR), least material requirement (LMR) nd reciprocity
requirement (RPR)
[4] JIS B 0024 製品の幾何特性仕様(GPS)−基本原則−GPS指示に関わる概念,原則及び規則
注記 対応国際規格 : ISO 8015,Geometrical product specifications (GPS)−Fundamentals−Concepts,
principles and rules
[5] JIS B 0025 製図−幾何公差表示方式−位置度公差方式
注記 対応国際規格 : ISO 5458,Geometrical product specifications (GPS)−Geometrical tolerancing−
Pattern and combined geometrical specification
[6] ISO 1660,Geometrical product specifications (GPS)−Geometrical tolerancing−Profile tolerancing
注記 対応日本産業規格 : JIS B 0027 製図−輪郭の寸法及び公差の表示方式
[7] JIS B 0028 製品の幾何特性仕様(GPS)−寸法及び公差の表示方式−円すい
注記 対応国際規格 : ISO 3040,Geometrical product specifications (GPS)−Dimensioning and tolerancing
−Cones
[8] JIS B 0401-1 製品の幾何特性仕様(GPS)−長さに関わるサイズ公差のISOコード方式−第1部 : サ
イズ公差,サイズ差及びはめあいの基礎
注記 対応国際規格 : ISO 286-1,Geometrical product specifications (GPS)−ISO code system for tolerances
on linear sizes−Part 1: Basis of tolerances, deviations and fits
[9] JIS B 0401-2 製品の幾何特性仕様(GPS)−長さに関わるサイズ公差のISOコード方式−第2部 : 穴
及び軸の許容差並びに基本サイズ公差クラスの表
注記 対応国際規格 : ISO 286-2,Geometrical product specifications (GPS)−ISO code system for tolerances
on linear sizes−Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
[10] JIS B 0420-1 製品の幾何特性仕様(GPS)−寸法の公差表示方式−第1部 : 長さに関わるサイズ
注記 対応国際規格 : ISO 14405-1,Geometrical product specifications (GPS)−Dimensional tolerancing
−Part 1: Linear sizes
[11] JIS B 0420-2 製品の幾何特性仕様(GPS)−寸法の公差表示方式−第2部 : 長さ又は角度に関わるサ
イズ以外の寸法
注記 対応国際規格 : ISO 14405-2,Geometrical product specifications (GPS)−Dimensional tolerancing
−Part 2: Dimensions other than linear or angular sizes
――――― [JIS B 0661 pdf 16] ―――――
15
B 0661 : 2020 (ISO 14638 : 2015)
[12] JIS B 0420-3 製品の幾何特性仕様(GPS)−寸法の公差表示方式−第3部 : 角度に関わるサイズ
注記 対応国際規格 : ISO 14405-3,Geometrical product specifications (GPS)−Dimensional tolerancing
−Part 3: Angular sizes
[13] JIS B 0601 製品の幾何特性仕様(GPS)−表面性状 : 輪郭曲線方式−用語,定義及び表面性状パラメ
ータ
注記 対応国際規格 : ISO 4287,Geometrical Product Specifications (GPS)−Surface texture: Profile
method−Terms, definitions and surface texture parameters
[14] JIS B 0631 製品の幾何特性仕様(GPS)−表面性状 : 輪郭曲線方式−モチーフパラメータ
注記 対応国際規格 : ISO 12085,Geometrical Product Specifications (GPS)−Surface texture: Profile
method−Motif parameters
[15] JIS B 0633 製品の幾何特性仕様(GPS)−表面性状 : 輪郭曲線方式−表面性状評価の方式及び手順
注記 対応国際規格 : ISO 4288,Geometrical Product Specifications (GPS)−Surface texture: Profile
method−Rules and procedures for the assessment of surface texture
[16] JIS B 0641(規格群) 製品の幾何特性仕様(GPS)−製品及び測定装置の測定による検査
注記 対応国際規格 : ISO 14253(規格群),Geometrical product specifications (GPS)−Inspection by
measurement of workpieces and measuring equipment
[17] JIS B 0651 製品の幾何特性仕様(GPS)−表面性状 : 輪郭曲線方式−触針式表面粗さ測定機の特性
注記 対応国際規格 : ISO 3274,Geometrical Product Specifications (GPS)−Surface texture: Profile
method−Nominal characteristics of contact (stylus) nstruments
[18] JIS B 0671(規格群) 製品の幾何特性仕様(GPS)−表面性状 : 輪郭曲線方式;プラトー構造表面の
特性評価
注記 対応国際規格 : ISO 13565(規格群),Geometrical Product Specifications (GPS)−Surface texture:
Profile method; Surfaces having stratified functional properties
[19] JIS B 0682-1 製品の幾何特性仕様(GPS)−真円度−第1部 : 用語及びパラメータ
注記 対応国際規格 : ISO 12181-1,Geometrical product specifications (GPS)−Roundness−Part 1:
Vocabulary and parameters of roundness
[20] JIS B 0682-2 製品の幾何特性仕様(GPS)−真円度−第2部 : 仕様オペレータ
注記 対応国際規格 : ISO 12181-2,Geometrical product specifications (GPS)−Roundness−Part 2:
Specification operators
[21] JIS B 0683-1 製品の幾何特性仕様(GPS)−真直度−第1部 : 用語及びパラメータ
注記 対応国際規格 : ISO 12780-1,Geometrical product specifications (GPS)−Straightness−Part 1:
Vocabulary and parameters of straightness
[22] JIS B 0683-2 製品の幾何特性仕様(GPS)−真直度−第2部 : 仕様オペレータ
注記 対応国際規格 : ISO 12780-2,Geometrical product specifications (GPS)−Straightness−Part 2:
Specification operators
[23] JIS B 7440(規格群) 製品の幾何特性仕様(GPS)−座標測定機(CMM)の受入検査及び定期検査
注記 対応国際規格 : ISO 10360(規格群),Geometrical product specifications (GPS)−Acceptance and
reverification tests for coordinate measuring systems (CMS)
[24] JIS B 7443-3 製品の幾何特性仕様(GPS)−座標測定機(CMM) : 測定不確かさの求め方−第3部 :
校正された測定物又は測定標準を使用する方法
――――― [JIS B 0661 pdf 17] ―――――
16
B 0661 : 2020 (ISO 14638 : 2015)
注記 対応国際規格 : ISO 15530-3,Geometrical product specifications (GPS)−Coordinate measuring
machines (CMM): Technique for determining the uncertainty of measurement−Part 3: Use of
calibrated workpieces or measurement standards
[25] JIS B 7503 ダイヤルゲージ
注記 対応国際規格 : ISO 463,Geometrical Product Specifications (GPS)−Dimensional measuring
equipment−Design and metrological characteristics of mechanical dial gauges
[26] JIS B 7506 ブロックゲージ
注記 対応国際規格 : ISO 3650,Geometrical Product Specifications (GPS)−Length standards−Gauge
blocks
[27] ISO 1101:2017,Geometrical product specifications (GPS)−Geometrical tolerancing−Tolerances of form,
orientation, location and run-out
注記 ISO/DIS 1101:1996,Geometrical product specifications (GPS)−Geometrical tolerancing−
Tolerances of form, orientation, location and run-outに対応するものとして次がある。
JIS B 0021:1998 製品の幾何特性仕様(GPS)−幾何公差表示方式−形状,姿勢,位置及び
振れの公差表示方式
[28] ISO 1829:1975,Selection of tolerance zones for general purposes
注記 この規格は,ISO 286-1:2010,Geometrical product specifications (GPS)−ISO code system for
tolerances on linear sizes−Part 1: Basis of tolerances, deviations and fitsに置き換えられた。
[29] ISO 1938-1:2015,Geometrical product specifications (GPS)−Dimensional measuring equipment−Part 1: Plain
limit gauges of linear size
[30] ISO 11562:1996,Geometrical Product Specifications (GPS)−Surface texture: Profile method−Metrological
characteristics of phase correct filters
注記 この規格は,ISO 16610-21:2011,Geometrical product specifications (GPS)−Filtration−Part 21:
Linear profile filters: Gaussian filtersに置き換えられた。
[31] ISO/PAS 12868:2009,Geometrical product specification (GPS)−Coordinate measuring machines (CMM):
Testing the performance of CMMs using single-stylus contacting probing systems
注記 この規格は,ISO 10360-5:2010,Geometrical product specifications (GPS)−Acceptance and
reverification tests for coordinate measuring machines (CMM)−Part 5: CMMs using single and
multiple stylus contacting probing systemsに置き換えられた。
[32] ISO 13385-1,Geometrical product specifications (GPS)−Dimensional measuring equipment−Part 1: Callipers;
Design and metrological characteristics
[33] ISO 13385-2,Geometrical product specifications (GPS)−Dimensional measuring equipment−Part 2: Calliper
depth gauges; Design and metrological characteristics
[34] ISO/TS 15530-4,Geometrical Product Specifications (GPS)−Coordinate measuring machines (CMM):
Technique for determining the uncertainty of measurement−Part 4: Evaluating task-specific measurement
uncertainty using simulation
[35] ISO/TR 16015,Geometrical product specifications (GPS)−Systematic errors and contributions to measurement
uncertainty of length measurement due to thermal influences
[36] ISO 16610(規格群),Geometrical product specification (GPS)−Filtration
[37] ISO/TS 23165,Geometrical product specifications (GPS)−Guidelines for the evaluation of coordinate
measuring machine (CMM) est uncertainty
――――― [JIS B 0661 pdf 18] ―――――
17
B 0661 : 2020 (ISO 14638 : 2015)
[38] ISO 25178-601,Geometrical product specifications (GPS)−Surface texture: Areal−Part 601: Nominal
characteristics of contact (stylus) nstruments
JIS B 0661:2020の引用国際規格 ISO 一覧
- ISO 14638:2015(IDT)
JIS B 0661:2020の国際規格 ICS 分類一覧
- 17 : 度量衡及び測定.物理的現象 > 17.040 : 線及び角度の測定 > 17.040.01 : 線及び角度の測定一般