※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 1005/3 は、技術委員会 ISO/TC 17, 鉄鋼によって開発され、1980 年 11 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストリア | イラン | ルーマニア |
| ブルガリア | イタリア | スペイン |
| 中国 | 日本 | スウェーデン |
| チェコスロバキア | 韓国、民主党 | スイス |
| エジプト、アラブ共和国 | 大韓民国 | 七面鳥 |
| フィンランド | オランダ | イギリス |
| ドイツ、フランス | ニュージーランド | ソビエト連邦 |
| ハンガリー | ポーランド | ベネズエラ |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
オーストラリア
ベルギー
フランス
インド
南アフリカ共和国
この国際規格は、ISO 勧告 R 1005/3-1969 を取り消し、置き換えます。ISO 勧告 R 1005/3-1969 は、その技術的改訂を構成します。
1 適用範囲と適用分野
1.1 ISO 1005 のこの部分は、表 1 および条項 4 に従って、非合金鋼および合金鋼のトラクションおよびトレーリング ストック用の車軸の製造および供給に関する要件を指定しています。
1.2 ISO 1005 のこの部分に加えて、ISO 404 の要件が適用されます。
2 参考文献
注 —これらの改訂版が国際規格として発行されるまでの間、関連する要件について購入者と製造業者が合意する必要があります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1005/3 was developed by Technical Committee ISO/TC 17, Steel, and was circulated to the member bodies in November 1980.
It has been approved by the member bodies of the following countries:
| Austria | Iran | Romania |
| Bulgaria | Italy | Spain |
| China | Japan | Sweden |
| Czechoslovakia | Korea, Dem. P. Rep. of | Switzerland |
| Egypt, Arab Rep. of | Korea, Rep. of | Turkey |
| Finland | Netherlands | United Kingdom |
| Germany, F.R. | New Zealand | USSR |
| Hungary | Poland | Venezuela |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
Australia
Belgium
France
India
South Africa, Rep. of
This International Standard cancels and replaces ISO Recommendation R 1005/3-1969, of which it constitutes a technical revision.
1 Scope and field of application
1.1 This part of ISO 1005 specifies requirements for the manufacture and supply of axles for tractive and trailing stock of unalloyed and alloyed steels in accordance with table 1 and clause 4.
1.2 In addition to this part of ISO 1005, the requirements of ISO 404 are applicable.
2 References
- ISO 82, Steel — Tensile testing.
- ISO 83, Steel — Charpy impact test (U-notch).
- ISO/R 377, Selection and preparation of samples and testpieces for wrought steel. 1)
- ISO 404, Steel and steel products — General technical deliveryrequirements.
- ISO 643, Steels — Micrographic determination of the ferritic oraustenitic grain size. 2)
- ISO 5948, Railway rolling stock material — Ultrasonicacceptance testing.
NOTE — Pending publication of these revisions as International Standards, it will be necessary for the relevant requirements to be agreed bythe purchaser and the manufacturer.