※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 61, プラスチック、小委員会 SC 11, 製品です。
この第 2 版は、第 1 版 (ISO 10123:1990) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
安全性に関する声明この国際規格を使用する人は、該当する場合、通常の実験室の慣行に精通している必要があります。この国際規格は、その使用に関連する安全上の懸念があるとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、規制要件を確実に遵守することは、ユーザーの責任です。
1 スコープ
この国際規格は、円筒形アセンブリ、ピンおよびカラー タイプの保持、またはねじ付きファスナーのロックおよびシールに使用される嫌気硬化性液体接着剤のせん断強度の測定方法を指定します。
この試験方法は、他の接着剤にも使用できます。
この試験は、接着剤のランク付けと品質管理を目的としています。結果は使用中の材料の性能を必ずしも反映するものではなく、この試験は設計目的で数値データを提供するのには適していません。
注記数値設計データは、実際の構造で使用される材料と構成を使用したテストから取得できます。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
ISO 683-9, 熱処理鋼、合金鋼、快削鋼 — 9: 鍛造快削鋼
ISO 7500-1, 金属材料 — 静的一軸試験機の検証 — 1: 引張/圧縮試験機 — 力測定システムの検証と校正
参考文献
| [1] | ISO 4588, 接着剤 — 接着接合のための金属表面の準備 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This second edition cancels and replaces the first edition (ISO 10123:1990), of which it constitutes a minor revision.
SAFETY STATEMENT Persons using this International Standard should be familiar with normal laboratory practice, if applicable. This International Standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory requirements.
1 Scope
This International Standard specifies a method for the determination of the shear strength of anaerobic-curing liquid adhesives used for retaining cylindrical assemblies, pin-and-collar type, or for locking and sealing threaded fasteners.
This test method can also be used for other adhesives.
The test is for ranking and quality control of adhesives. The result does not necessarily reflect the performance of the materials in service and the test is not suitable for providing numerical data for design purposes.
NOTE Numerical design data can be obtained from tests using the materials and configurations used in the actual structure.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 683-9, Heat-treatable steels, alloy steels and free-cutting steels — 9: Wrought free-cutting steels
ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
Bibliography
| [1] | ISO 4588, Adhesives — Preparation of metal surfaces for adhesive bonding |