※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 加盟団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
国際規格 ISO 1019 は、ISO/TC 36 の映画撮影技術委員会によって開発されました。
この第 2 版は、ISO の技術作業に関する指令の第 1 部の 5.10.1 項に従って、ISO 評議会に直接提出されました。これは、次の国の加盟団体によって承認されていた初版 (ISO 1019-1975) を取り消し、置き換えます。
この文書に反対を表明した加盟団体はなかった。
| ベルギー | ドイツ、フランス | ルーマニア |
| ブラジル | ギリシャ | 南アフリカ共和国 |
| ブルガリア | ハンガリー | スウェーデン |
| カナダ | イスラエル | スイス |
| チリ | イタリア | イギリス |
| チェコスロバキア | 日本 | アメリカ合衆国 |
| エジプト、フランス・アラブ共和国 | 韓国、オランダ代表 |
1 適用範囲と適用分野
1.1この国際規格は、16 mm 映画フィルムの公称容量 15 , 30 , 60 m (200 フィート) および 120 m (400 フィート) の日光負荷スプールの寸法と特性を指定します。 。
注この国際規格で指定されている寸法は、ISO 1116 でマイクロフィルム カメラの供給および巻き取りスプールに指定されている寸法と実質的に一致しています (付録を参照)
1.2高速カメラ用のスプールは慎重にバランスを取る必要があり、必ずしもこの国際規格の対象となるわけではありません。
2 参考資料
- ISO 1116, 16 mm および 35 mm マイクロフィルムのマイクロコピー。スプールとリール。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1019 was developed by Technical Committee ISO/TC 36, Cinematography.
This second edition was submitted directly to the ISO Council, in accordance with clause 5.10.1 of part 1 of the Directives for the technical work of ISO. It cancels and replaces the first edition (i.e. ISO 1019-1975), which had been approved by the member bodies of the following countries:
No member body had expressed disapproval of the document.
| Belgium | Germany, F. R. | Romania |
| Brazil | Greece | South Africa, Rep. of |
| Bulgaria | Hungary | Sweden |
| Canada | Israel | Switzerland |
| Chile | Italy | United Kingdom |
| Czechoslovakia | Japan | USA |
| Egypt, Arab Rep. of France | Korea, Rep. of Netherlands |
1 Scope and field of application
1.1 This International Standard specifies the dimensions and characteristics of daylight loading spools of nominal capacities 15 m (50 ft), 30 m (100 ft), 60 m (200 ft) and 120 m (400 ft) for 16 mm motion-picture film.
NOTE The dimensions specified in this International Standard are in substantial agreement with those given for microfilm camera supply and take-up spools in ISO 1116 (see the annex).
1.2 Spools for high-speed cameras should be carefully balanced and are not necessarily covered by this International Standard.
2 Reference
- ISO 1116, Microcopying 16 mm and 35 mm microfilms. spools and reels.