この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 10251 は技術委員会 ISO/TC 183, 銅、鉛、亜鉛、ニッケルの鉱石および精鉱によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 10251:1997) を取り消して置き換えるものです。
序章
元素硫黄の酸化、分解、または昇華が寄与する可能性がありますが、乾燥時の質量損失のほとんどは水分の損失によるものであるため、水分含有量としての質量損失のパーセンテージへの言及は適切です。
元素硫黄の酸化、分解または昇華が起こることが示されている場合、または灯油などの揮発性有機浮遊選鉱試薬が存在する場合、化学分析試験サンプルは乾燥水分試験部分から調製する必要があります。このような状況下では、ISO 12743 に従って確立されたサンプリング スキームは、水分サンプルとテスト ポーションがその後の化学分析に十分に対応できるものであることを保証する必要があります。酸化が問題となる場合は、乾燥段階で不活性雰囲気を使用することもできます。附属書 A は、濃縮物が酸化、分解、または昇華を受けやすいかどうかを判断できる手順を提供します。
この国際規格には、危険な物質、操作、および機器が含まれる場合があります。この国際規格は、その使用に関連するすべての安全問題に対処することを目的としていません。適切な健康および安全慣行を確立し、使用前に規制制限の適用可能性を判断することは、ユーザーの責任です。
1 スコープ
この国際規格は、銅、鉛、亜鉛、またはニッケル精鉱のロットの水分含有量の測定方法を指定します。これは、この文書で指定された乾燥条件下での水分試験部分の質量損失率として定義されます。
ロットの金属含有量の偏りのない推定値を得るには、バルク水分と吸湿性水分の測定、または予備乾燥試験片の調製に同じ乾燥条件を使用することが重要です。
この国際規格は、水銀や硫黄などの揮発性元素の測定に使用されるサンプルの乾燥には適用されません。このようなサンプルは周囲温度で乾燥させ、化学分析時に ISO 9599 に従って吸湿性水分の測定を行います。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 12743, 銅、鉛、亜鉛およびニッケル濃縮物 - 金属および水分含有量を測定するためのサンプリング手順
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
代表的なサンプル
精度とバイアスの両方が許容範囲内にある濃縮物のより大きな質量を表す濃縮物の量
3.2
多く
サンプリングする濃縮物の量
3.3
たくさんのサンプル
ロットを代表する濃縮物の量
3.4
サブロット
別々に処理されるロットの細分化された部分。それぞれが、水分測定などで別々に分析されるサブサンプルを生成します。
3.5
サブサンプル
サブロットを代表する濃縮物の量
3.6
インクリメント
1回の操作でサンプリング装置によって選択された濃縮物の量
3.7
水分サンプル
水分測定のために試験部分を採取する濃縮物の代表的な量
注記1:あるいは、水分含有量を測定するために水分サンプル全体を乾燥させてもよい。
3.8
実験室サンプル
実験室に送られ、化学分析のための 1 つまたは複数の試験サンプルのさらなる処理および選択に使用できるように処理されたサンプル。
3.9
共通サンプル
質量損失を決定するために乾燥され、その後、化学分析用の 1 つまたは複数の試験サンプルのさらなる処理および選択に使用される濃縮物の代表的な量
3.10
テストサンプル
1つまたは複数の試験部分を選択する前に、乾燥または吸湿性水分測定などの追加の準備が必要な場合に、実験室サンプルに対して得られる濃縮物の代表的な量。
3.11
テスト部分
全体として水分測定または分析に供される水分サンプル、実験室サンプルまたは試験サンプルから採取された濃縮物の代表的な量。
参考文献
| [1] | ISO 9599, 硫化銅、鉛、亜鉛精鉱 — 分析サンプル中の吸湿性水分の測定 — 重量法 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10251 was prepared by Technical Committee ISO/TC 183, Copper, lead, zinc and nickel ores and concentrates.
This second edition cancels and replaces the first edition (ISO 10251:1997), which has been technically revised.
Introduction
Reference to the percentage mass loss as moisture content is appropriate because, although oxidation, decomposition or sublimation of elemental sulfur may contribute, most of the mass loss on drying is due to loss of moisture.
When oxidation, decomposition or sublimation of elemental sulfur has been shown to occur or volatile organic flotation reagents such as kerosene are present, the chemical analysis test sample should be prepared from the dried moisture test portions. Under these circumstances, the sampling scheme established in accordance with ISO 12743 must ensure that moisture samples and test portions are sufficiently representative for subsequent chemical analysis. Where oxidation is a problem, an inert atmosphere may also be used during the drying stage. Annex A provides a procedure by which it can be determined whether or not a concentrate is susceptible to oxidation, decomposition or sublimation.
This International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety issues associated with its use. It is the responsibility of the user to establish appropriate health and safety practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard specifies methods for the determination of moisture content of a lot of copper, lead, zinc or nickel concentrate, defined as the percentage mass loss of the moisture test portion under the conditions of drying specified in this document.
In order to obtain an unbiased estimate of the metal content of the lot, it is important that the same drying conditions are used for the determination of bulk and hygroscopic moisture or for preparing a predried test portion.
This International Standard is not applicable to drying samples used for determination of volatile elements such as mercury and sulfur. Such samples are allowed to dry at ambient temperature, and a hygroscopic moisture determination is carried out according to ISO 9599 at the time of chemical analysis.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 12743, Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
representative sample
quantity of concentrate representing a larger mass of concentrate with both precision and bias within acceptable limits
3.2
lot
quantity of concentrate to be sampled
3.3
lot sample
quantity of concentrate that is representative of the lot
3.4
sub-lot
subdivided parts of a lot that are processed separately, each of them producing a subsample which is analysed separately, e.g. for moisture determination
3.5
subsample
quantity of concentrate that is representative of the sub-lot
3.6
increment
quantity of concentrate selected by a sampling device in one operation
3.7
moisture sample
representative quantity of concentrate from which test portions are taken for moisture determination
Note 1 to entry: Alternatively, the whole moisture sample may be dried to determine its moisture content.
3.8
laboratory sample
sample that is processed so that it can be sent to the laboratory and used for further processing and selection of one or more test samples for chemical analysis
3.9
common sample
representative quantity of concentrate that is dried to determine its mass loss and subsequently used for further processing and selection of one or more test samples for chemical analysis
3.10
test sample
representative quantity of concentrate obtained for a laboratory sample when additional preparation, such as drying or hygroscopic moisture determination, is needed prior to selection of one or more test portions
3.11
test portion
representative quantity of concentrate taken from a moisture sample, a laboratory sample or a test sample that is submitted to moisture determination or analysis in its entirety
Bibliography
| [1] | ISO 9599, Copper, lead and zinc sulfide concentrates — Determination of hygroscopic moisture in the analysis sample — Gravimetric method |