この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における ISO の WTO 原則への準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 172, 光学およびフォトニクス、小委員会 SC 7, 眼科光学および器具です。
この第 4 版は、技術的に改訂された第 3 版 (ISO 10322-1:2006) を取り消して置き換えます。
ISO 10322 は、以下の部分で構成されており、一般的なタイトルは「眼科用光学 - 半仕上げの眼鏡レンズ ブランク」です。
- Part 1: 単焦点および多焦点レンズブランクの仕様
- Part 2:累進屈折力レンズ ブランクと累進屈折力レンズ ブランクの仕様
序章
以前の版と比較して、ISO 10322 のこの部分は現在、すべてのタイプの半完成単焦点および多焦点レンズブランクに適用されています。
1 スコープ
ISO 10322 のこの部分は、すべての半完成の単焦点および多焦点眼鏡レンズ ブランクの光学的および幾何学的特性の要件を指定します。
2 参考文献
以下のドキュメントの全体または一部は、このドキュメントで規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 7944, 光学および光学機器 — 参照波長
- ISO 8598-1, 光学および光学機器 — 焦点距離計 — 1: 汎用機器
- ISO 13666, 眼科光学 — 眼鏡レンズ — 語彙
3 用語と定義
このドキュメントの目的のために、ISO 13666 で指定された用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 7, Ophthalmic optics and instruments.
This fourth edition cancels and replaces the third edition (ISO 10322-1:2006), which has been technically revised.
ISO 10322 consists of the following parts, under the general title Ophthalmic optics — Semi-finished spectacle lens blanks:
- Part 1: Specifications for single-vision and multifocal lens blanks
- Part 2:Specifications for progressive-power and degressive-power lens blanks
Introduction
Compared with previous editions, this part of ISO 10322 now applies to all types of semi-finished single-vision and multifocal lens blanks.
1 Scope
This part of ISO 10322 specifies requirements for the optical and geometrical properties of all semi-finished single-vision and multifocal spectacle lens blanks.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 7944, Optics and optical instruments — Reference wavelengths
- ISO 8598-1, Optics and optical instruments — Focimeters — 1: General purpose instruments
- ISO 13666, Ophthalmic optics — Spectacle lenses — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 13666 apply.