※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 1035/2 は、技術委員会 ISO/TC 17, スチールによって開発され、1978 年 12 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | 南アフリカ共和国 |
| オーストリア | ハンガリー | スペイン |
| ベルギー | インド | スウェーデン |
| ブルガリア | イタリア | スイス |
| カナダ | 韓国、民主党 | タイ |
| チェコスロバキア | 大韓民国 | 七面鳥 |
| デンマーク | オランダ | イギリス |
| エジプト、アラブ共和国 | ニュージーランド | ソビエト連邦 |
| フィンランド | ポーランド | |
| フランス | ルーマニア |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
日本
アメリカ
この国際規格は、ISO 勧告 R 1035/2-1969 を取り消し、置き換えます。ISO 勧告 R 1035/2-1969 の技術的改訂を構成します。
1 適用範囲と適用分野
この国際規格は、メートル系列の熱間圧延鋼角棒の寸法を指定します。
2 参照
- ISO 1035/4, 熱間圧延棒鋼 — 4: 丸棒、角棒、平棒の公差 — メートル系列。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1035/2 was developed by Technical Committee ISO/TC 17, Steel, and was circulated to the member bodies in December 1978.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F. R. | South Africa, Rep. of |
| Austria | Hungary | Spain |
| Belgium | India | Sweden |
| Bulgaria | Italy | Switzerland |
| Canada | Korea, Dem. P. Rep. of | Thailand |
| Czechoslovakia | Korea, Rep. of | Turkey |
| Denmark | Netherlands | United Kingdom |
| Egypt, Arab Rep. of | New Zealand | USSR |
| Finland | Poland | |
| France | Romania |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
Japan
USA
This International Standard cancels and replaces ISO Recommendation R 1035/2-1969, of which it constitutes a technical revision.
1 Scope and field of application
This International Standard specifies dimensions of metric series hot-rolled steel square bars.
2 Reference
- ISO 1035/4, Hot-rolled steel bars — 4: Tolerances of round, square and flat bars — Metric series.