※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 1035/4 は、技術委員会 ISO/TC 17, スチールによって開発され、1981 年 4 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | インド | ルーマニア |
| オーストリア | イタリア | 南アフリカ共和国 |
| ブラジル | 日本 | スペイン |
| カナダ | ケニア | スウェーデン |
| 中国 | 韓国、民主党 | スイス |
| チェコスロバキア | 大韓民国 | タンザニア |
| エジプト、アラブ共和国 | オランダ | 七面鳥 |
| フランス | ニュージーランド | イギリス |
| ドイツ、フランス | ノルウェー | ソビエト連邦 |
| ハンガリー | ポーランド |
次の国のメンバー団体は、技術的な理由で文書の不承認を表明しました。
| ベルギー アメリカ |
この第 2 版は、第 1 版 (つまり、ISO 1035/4-1976) を取り消して置き換えます。
1 適用範囲と適用分野
この国際規格は、次の製品形態でストレート長さで供給される熱間圧延棒鋼に適用されるメートル法の寸法公差を指定します。
- a)丸棒 (寸法については、ISO 1035/1 を参照);
- b)角棒 (寸法については、ISO 1035/2 を参照);
- c)六角棒;
- d)八角形の棒
- e)フラットバー (寸法については、ISO 1035/3 を参照)
メーカーが達成できる公差は、鋼の種類によって異なる場合があります。購入者が必要とする公差は、バーの用途によって異なる場合があります。したがって、この国際規格は、いくつかの公差等級を指定しています (表 1 を参照)適切な公差等級は、鋼種に関連する国際規格で指定する必要があり、必要に応じて注文書で指定する必要があります。
2 参考文献
- ISO 1035/1, 熱間圧延棒鋼 — 1: 丸棒の寸法。
- ISO 1035/2, 熱間圧延棒鋼 — 2: 角棒の寸法。
- ISO 1035/3, 熱間圧延棒鋼 — 3: 平鋼の寸法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1035/4 was developed by Technical Committee ISO/TC 17, Steel, and was circulated to the member bodies in April 1981.
It has been approved by the member bodies of the following countries:
| Australia | India | Romania |
| Austria | Italy | South Africa, Rep. of |
| Brazil | Japan | Spain |
| Canada | Kenya | Sweden |
| China | Korea, Dem. P. Rep. of | Switzerland |
| Czechoslovakia | Korea, Rep. of | Tanzania |
| Egypt, Arab Rep. of | Netherlands | Turkey |
| France | New Zealand | United Kingdom |
| Germany, F.R. | Norway | USSR |
| Hungary | Poland |
The member bodies of the following countries expressed disapproval of the document on technical grounds:
| Belgium USA |
This second edition cancels and replaces the first edition (i.e. ISO 1035/4-1976).
1 Scope and field of application
This International Standard specifies metric dimensional tolerances applicable to hot-rolled steel bars supplied in straight lengths in the following product forms:
- a) round bars (for dimensions, see ISO 1035/1);
- b) square bars (for dimensions, see ISO 1035/2);
- c) hexagonal bars;
- d) octagonal bars;
- e) flat bars (for dimensions, see ISO 1035/3).
The tolerances achievable by the manufacturer may vary with the steel types. The tolerances required by the purchaser may differ according to the application of the bars. Thus this International Standard specifies several tolerance classes (see table 1). The appropriate tolerance class should be specified in the International Standard relevant to the steel grades and, where appropriate, on the order.
2 References
- ISO 1035/1, Hot-rolled steel bars — 1: Dimensions of round bars.
- ISO 1035/2, Hot-rolled steel bars — 2: Dimensions of square bars.
- ISO 1035/3, Hot-rolled steel bars — 3: Dimensions of flat bars.