※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、 www を参照してください。 .iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 31, タイヤ、リムおよびバルブ、小委員会 SC 7, 産業用タイヤおよびリムによって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 10499-1:1991) を取り消して置き換えるものです。また、技術正誤表 ISO 10499-1:1991/Cor も組み込まれています。 1:199前作からの主な変更点は以下の通り。
- 箇条 6 に外径に関する新しい副箇条を追加。
ISO 10499 シリーズのすべての部品のリストは、ISO Web サイトで見つけることができます。
1 スコープ
この文書は、主に整備された表面での使用を目的とした産業機械用の空気入りタイヤ リム用のゴム ソリッド タイヤのメトリック シリーズの指定、寸法、およびマーキングを含む主な要件を指定します。
これらのタイヤに適合するリムの輪郭は、ISO 3739-1 および ISO 3739-3 で指定されています。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3739-1, 産業用タイヤおよびリム — 1: 5 度のテーパーまたはフラット ベース リムの空気入りタイヤ (メトリック シリーズ) — 名称、寸法、およびマーキング
- ISO 3877-4, タイヤ、バルブおよびチューブ — 同等の用語のリスト — 4: ソリッドタイヤ
- ISO 4223-2, タイヤ業界で使用される用語の定義 — 2: ソリッドタイヤ
3 用語と定義
このドキュメントの目的のために、ISO 4223-2 および ISO 3877-4 に記載されている用語と定義が適用されます。
ISO と IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
参考文献
| ISO 3739-3, 産業用タイヤおよびリム – 3: リム |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves, Subcommittee SC 7, Industrial tyres and rims.
This second edition cancels and replaces the first edition (ISO 10499-1:1991) which has been technically revised. It also incorporates the Technical Corrigendum ISO 10499-1:1991/Cor. 1:1997. The main changes compared to the previous edition are as follows:
- addition of a new subclause on overall diameter in Clause 6.
A list of all parts in the ISO 10499 series can be found on the ISO website.
1 Scope
This document specifies the main requirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces.
Rim contours fitting these tyres are specified in ISO 3739-1 and ISO 3739-3.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3739-1, Industrial tyres and rims — 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Designation, dimensions and marking
- ISO 3877-4, Tyres, valves and tubes — List of equivalent terms — 4: Solid tyres
- ISO 4223-2, Definitions of some terms used in the tyre industry — 2: Solid tyres
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4223-2 and ISO 3877-4 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Bibliography
| ISO 3739-3, Industrial tyres and rims – 3: Rims |