※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 10499-2 は、技術委員会 ISO/TC 31, タイヤ、リムおよびバルブ、小委員会 SC 7, 産業用タイヤおよびリムによって作成されました。
ISO 10499 は、 「産業用タイヤとリム - 空気入りタイヤ リム用ゴムソリッドタイヤ (メートルシリーズ)」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 名称、寸法、およびマーキング
- Part 2: 定格荷重
1 スコープ
ISO 10499 のこの部分では、主に準備された表面で使用する産業車両用の空気入りタイヤ リム用のゴムソリッドタイヤのメートル系列の定格荷重を指定します。
指定、寸法、およびマーキングは ISO 10499-1 でカバーされています。これらのタイヤに適合するリムの輪郭は ISO 3739-3 で指定されています。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3739-3:1995, 産業用タイヤとリム — Part 3: リム。
- ISO 3877-4:1984, タイヤ、バルブおよびチューブ — 同等の用語のリスト — Part 4: ソリッドタイヤ。
- ISO 4223-2:1991, タイヤ業界で使用されるいくつかの用語の定義 — Part 2: ソリッド タイヤ。
- ISO 5053:1987, 動力付き産業用トラック - 用語。
- ISO 10499-1:1991, 産業用タイヤおよびリム — 空気入りタイヤリム用ゴムソリッドタイヤ (メートル系シリーズ) — Part 1: 指定、寸法およびマーキング。
3 つの定義
ISO 10499 のこの部分の目的には、ISO 3877-4, ISO 4223-2, および ISO 5053 で与えられる定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 10499-2 was prepared by Technical Committee ISO/TC 31, Tyres, rims and valves, Subcommittee SC 7, Industrial tyresand rims.
ISO 10499 consists of the following parts, under the general title Industrialtyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims:
- Part 1: Designation, dimensions and marking
- Part 2: Load ratings
1 Scope
This part of ISO 10499 specifies the load ratings of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial vehicles for use on prepared surfaces.
Designation, dimensions and marking are covered in ISO 10499-1; rim contours fitting these tyres are specified in ISO 3739-3.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3739-3:1995, Industrial tyres and rims — Part 3: Rims.
- ISO 3877-4:1984, Tyres, valves and tubes — List of equivalent terms — Part 4: Solid tyres.
- ISO 4223-2:1991, Definitions of some terms used in the tyre industry — Part 2: Solid tyres.
- ISO 5053:1987, Powered industrial trucks — Terminology.
- ISO 10499-1:1991, Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking.
3 Definitions
For the purposes of this part of ISO 10499, the definitions given in ISO 3877-4, ISO 4223-2 and ISO 5053 apply.