※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化機関 (ISO 会員団体) の世界的な連合体です。国際規格の開発作業は、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。
技術委員会によって採択された国際規格草案は、ISO 理事会によって国際規格として承認される前に、承認を得るために加盟団体に回覧されます。
1972 年以前は、技術委員会の作業結果は ISO 勧告として発行されていました。これらの文書は現在、国際標準への変換の過程にあります。このプロセスの一環として、ISO/TC 101 技術委員会は ISO 勧告 R 1049 を検討し、それが技術的に変革に適していると判断しました。したがって、国際規格 ISO 1049 は、技術的に同一である ISO 勧告 R 1049-1969 に代わるものです。
ISO 勧告 R 1049 は、以下の国の加盟機関によって承認されました。
| ベルギー | ドイツ | スウェーデン |
| ブラジル | ギリシャ | スイス |
| カナダ | インド | 七面鳥 |
| チリ | イスラエル | イギリス |
| チェコスロバキア | イタリア | ソビエト連邦 |
| エジプト、アラブ共和国 | 日本 | ユーゴスラビア |
| フィンランド | オランダ | |
| フランス | 南アフリカ共和国 |
以下の国の加盟団体は、技術的な理由からこの勧告に不承認を表明しました。
アメリカ合衆国
ISO/R 1049 の国際規格への変換を承認しない加盟団体はありませんでした。
1 スコープ
この国際規格は、長方形または台形のトラフを備えた振動コンベヤおよびフィーダの基本特性を指定します。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO Member Bodies). The work of developing International Standards is carried out through ISO Technical Committees. Every Member Body interested in a subject for which a Technical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated to the Member Bodies for approval before their acceptance as International Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published as ISO Recommendations; these documents are now in the process of being transformed into International Standards. As part of this process, Technical Committee ISO/TC 101 has reviewed ISO Recommendation R 1049 and found it technically suitable for transformation. International Standard ISO 1049 therefore replaces ISO Recommendation R 1049-1969 to which it is technically identical.
ISO Recommendation R 1049 was approved by the Member Bodies of the following countries:
| Belgium | Germany | Sweden |
| Brazil | Greece | Switzerland |
| Canada | India | Turkey |
| Chile | Israel | United Kingdom |
| Czechoslovakia | Italy | U.S.S.R. |
| Egypt, Arab Rep. of | Japan | Yugoslavia |
| Finland | Netherlands | |
| France | South Africa, Rep. of |
The Member Body of the following country expressed disapproval of the Recommendation on technical grounds:
U.S.A.
No Member Body disapproved the transformation of ISO/R 1049 into an International Standard.
1 SCOPE
This International Standard specifies the basic characteristics of vibrating conveyors and feeders with rectangular or trapezoidal trough.