※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 105-B08 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 1, 着色された繊維および着色剤の試験によって作成されました。
ISO 105 は以前、1978 年から 1985 年までの発行日で、13 の「パート」に分けて発行され、それぞれがレター (「 Part A」など) で指定されていました。 2 桁のシリアル番号 (例: 「セクション A01」)これらのセクションは現在、別のドキュメントとして再発行されており、それ自体が「パーツ」と指定されていますが、以前の英数字の指定は保持されています。これらの部品の完全なリストは、ISO 105-A01 に記載されています。
ISO 105 のこの部分の附属書 A および Â は、情報提供のみを目的としています。
1 スコープ
ISO 105 のこの部分では、耐光堅牢度の試験方法の ISO 105-B シリーズの適切な部分で使用されるブルーウール参照材料 1 から 7 の生産バッチの品質管理を実行する方法について説明しています。
この方法では、染色の均一性を機器で評価するための 1 つの手順と、標準物質の退色特性を評価するための 2 つの手順が指定されています。
次いで、試験中の基準物質の特性がマスター基準物質の特性と比較される。
この方法は、参考資料 1 から 7 として使用することを意図したすべての染色ウール生地に適用できます (ISO 105-B01:1994 の 4.1.1 節を参照)
ノート
- 1この方法は、グレー スケール 4 とグレー スケール 3 のコントラストにフェードするのに必要な時間が非常に長くなるため、ブルー ウール リファレンス 8 には適していません。ブルーウール参照 8 への適用に向けて、別の方法が検討されています。
- 2指定された方法は ISO 105-B02 に基づいています。これは、国際的に最も広く使用されている耐光堅牢度試験方法where 、ブルー ウールの参照が指定されているすべての方法の代表であると考えられています。
- 3許容レベルおよび保管条件に関する情報は、それぞれ附属書 A および Â に記載されています。
2 参考文献
以下の規格には規定が含まれており、このテキストで参照することにより、ISO 105 のこの部分の規定を構成します。発行の時点で、示された版は有効でした。すべての規格は改訂される可能性があり、ISO 105 のこの部分に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 105-A01:1994, テキスタイル - 色堅牢度のテスト - Part A01: テストの一般原則。
- ISO 105-A02:1993, テキスタイル — 色堅牢度のテスト — Part A02: 色の変化を評価するためのグレー スケール。
- ISO 105-B01:1994, テキスタイル — 色堅牢度のテスト — Part B01: 光に対する色堅牢度: 日光。
- ISO 105-B02:1994, テキスタイル — 染色堅牢度のテスト — Part B02: 人工光に対する染色堅牢度: キセノン アーク フェージング ランプ テスト。
- ISO 105-J03:1995 1) 、テキスタイル — 色堅牢度のテスト — Part J03: 色差の計算。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 105-B08 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants.
ISO 105 was previously published in thirteen"parts", each designated by a letter (e.g."Part A"), with publication dates between 1978 and 1985. Each part contained a series of"sections", each designated by the respective part letter and by a two-digit serial number (e.g."Section A01"). These sections are now being republished as separate documents, themselves designated"parts" but retaining their earlier alphanumeric designations. A complete list of these parts is given in ISO 105-A01.
Annexes A and В of this part of ISO 105 are for information only.
1 Scope
This part of ISO 105 describes a method for carrying out quality control of production batches of the blue wool reference materials 1 to 7 which are to be used in the appropriate parts of ISO 105-B series of test methods for colour fastness to light.
The method specifies one procedure for instrumental assessment of the evenness of dyeing and two procedures for assessing the fading characteristics of the reference materials, one of which uses visual assessment techniques and the other instrumental assessment.
The characteristics of the reference material(s) under test then are compared with the characteristics of master reference material(s).
The method is applicable to all dyed wool fabrics intended for use as reference materials 1 to 7 (see ISO 105-B01:1994, subclause 4.1.1).
NOTES
- 1 This method is not suitable for blue wool reference 8, since the time required to fade to grey scale 4 and grey scale 3 contrasts would be inordinately long. An alternative method is under consideration for application to blue wool reference 8.
- 2 The method given is based on ISO 105-B02, which is considered internationally to be the most widely employed method for testing colour fastness to light and to be representative of all methods where the use of blue wool references is specified.
- 3 Information on levels of acceptance and storage conditions is given in annexes A and В respectively.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 105-A01:1994, Textiles — Tests for colour fastness — Part A01: General principles of testing.
- ISO 105-A02:1993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour.
- ISO 105-B01:1994, Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight.
- ISO 105-B02:1994, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test.
- ISO 105-J03:1995 1) , Textiles — Tests for colour fastness — Part J03: Calculation of colour differences.