ISO 105-C08:2010 テキスタイル—耐変色性のテスト—パートC08:低温漂白活性剤を組み込んだ非リン酸塩参照洗剤を使用した家庭用および商業用洗濯に対する耐変色性 | ページ 2

※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。

序文

ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISO と連携している政府および非政府の国際組織も、仕事で。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。

国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.

技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。

このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。

ISO 105-C08 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 1, 着色された繊維および着色剤の試験によって作成されました。

この第 2 版は、技術的に改訂された第 1 版 (ISO 105-C08:2001) を取り消して置き換えるものです。箇条 2 の参照の日付が削除され、箇条 6 に公差が追加され、該当する箇条に機器測定が追加されました。また、ISO 105-C08:2001/Amd.1:2006 および ISO 105-C08:2001/Cor.1:2002 の修正版も組み込まれています。

ISO 105 は、以前は 13 の「パート」で発行され、それぞれが文字で指定され (「 Part A」など)、発行日は 1978 年から 1985 年でした。 2 桁のシリアル番号 (例: 「セクション A01」)これらのセクションは現在、別のドキュメントとして再発行されており、それ自体が「パーツ」と指定されていますが、以前の英数字の指定は保持されています。これらの部品の完全なリストは、ISO 105-A01 に記載されています。

序章

ISO 105-C06 で指定されている試験方法および ISO 105 のこの部分で指定されている試験方法は、ISO 105-C10 で指定されている洗濯試験方法とは異なり、家庭用または商業用の洗濯手順による洗濯の影響を反映することを目的としています。

ISO 105-A01 で説明されているテストの一般原則は、ISO 105 のこの部分を使用する前に理解する必要があります。

1 スコープ

ISO 105 のこの部分は、低温漂白剤活性剤を組み込んだ非リン酸塩参照洗剤を使用して、通常の家庭用品に使用される家庭用または商業用の洗濯手順に対する、すべての種類およびすべての形態の布地の色の耐性を決定する方法を指定します。

1回のテストでの脱着および/または研磨作用による色の損失と染色は、1回の家庭用または商業用の洗濯とほぼ同じです.

この方法は、一部の市販の洗濯製品に含まれる蛍光増白剤の影響を反映していません。

2 参考文献

本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。

  • ISO 105-A01:2010, テキスタイル — 色堅牢度のテスト — A01: テストの一般原則
  • ISO 105-A02, テキスタイル — 色堅牢度のテスト — A02: 色の変化を評価するグレースケール
  • ISO 105-A03, テキスタイル — 色堅牢度のテスト — A03: 染色を評価するためのグレースケール
  • ISO 105-A04, テキスタイル — 色堅牢度のテスト — A04: 隣接する布地の汚染度の機器評価方法
  • ISO 105-A05, テキスタイル — 色堅牢度のテスト — A05: グレースケール評価を決定するための色の変化の機器評価
  • ISO 105-F01, テキスタイル — 色堅牢度のテスト — F01:ウール隣接生地仕様
  • ISO 105-F02, テキスタイル — 色堅牢度のテスト — F02: コットンとビスコース隣接生地の仕様
  • ISO 105-F03, テキスタイル — 色堅牢度のテスト — F03: ポリアミド隣接生地の仕様
  • ISO 105-F04, テキスタイル — 色堅牢度のテスト — F04:ポリエステル隣接生地の仕様
  • ISO 105-F05, テキスタイル — 色堅牢度のテスト — F05:アクリル隣接生地仕様
  • ISO 105-F06, テキスタイル — 色堅牢度のテスト — F06: シルク隣接生地の仕様
  • ISO 105-F07, テキスタイル — 色堅牢度のテスト — F07: 二次アセテート隣接生地の仕様
  • ISO 105-F10, テキスタイル — 色堅牢度のテスト — F10: 隣接ファブリックの仕様: マルチファイバー
  • ISO 3696, 分析ラボ用水 — 仕様および試験方法

参考文献

[1]ISO 105-C06, テキスタイル — 色堅牢度のテスト — C06: 家庭用および商業用洗濯に対する染色堅ろう度
[2]ISO 105-C10, テキスタイル — 色堅牢度のテスト — C10: 石鹸または石鹸とソーダでの洗濯に対する染色堅ろう度
[3]ISO 105-J01, テキスタイル — 色堅牢度のテスト — J01: 表面色測定の一般原則
[4]ISO 105-J03, テキスタイル — 色堅牢度のテスト — J03: 色差の計算

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 105-C08 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants.

This second edition cancels and replaces the first edition (ISO 105-C08:2001), which has been technically revised. The dates of the references in Clause 2 have been removed, tolerances have been added in Clause 6 and instrumental measurement has been added to applicable clauses. It also incorporates ISO 105-C08:2001/Amd.1:2006 and a modified version of ISO 105-C08:2001/Cor.1:2002.

ISO 105 was previously published in 13 “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Each part contained a series of “sections”, each designated by the respective part letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of these parts is given in ISO 105-A01.

Introduction

The test methods specified in ISO 105-C06 and that specified in this part of ISO 105 are intended to reflect the effect of laundering by domestic or commercial laundering procedures, as distinct from the washing test methods given in ISO 105-C10.

The general principles of testing described in ISO 105-A01 must be understood before using this part of ISO 105.

1 Scope

This part of ISO 105 specifies methods for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles using a non-phosphate reference detergent incorporating a low-temperature bleach activator.

The colour loss and staining resulting from desorption and/or abrasive action in one single test closely approximates to one domestic or commercial laundering.

This method does not reflect the effect of optical brighteners present in some commercial washing products.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

  • ISO 105-A01:2010, Textiles — Tests for colour fastness — A01: General principles of testing
  • ISO 105-A02, Textiles — Tests for colour fastness — A02: Grey scale for assessing change in colour
  • ISO 105-A03, Textiles — Tests for colour fastness — A03: Grey scale for assessing staining
  • ISO 105-A04, Textiles — Tests for colour fastness — A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
  • ISO 105-A05, Textiles — Test for colour fastness — A05: Instrumental assessment of change in colour for determination of grey scale rating
  • ISO 105-F01, Textiles — Tests for colour fastness — F01: Specification for wool adjacent fabric
  • ISO 105-F02, Textiles — Tests for colour fastness — F02: Specification for cotton and viscose adjacent fabrics
  • ISO 105-F03, Textiles — Tests for colour fastness — F03: Specification for polyamide adjacent fabric
  • ISO 105-F04, Textiles — Tests for colour fastness — F04: Specification for polyester adjacent fabric
  • ISO 105-F05, Textiles — Tests for colour fastness — F05: Specification for acrylic adjacent fabric
  • ISO 105-F06, Textiles — Tests for colour fastness — F06: Specification for silk adjacent fabric
  • ISO 105-F07, Textiles — Tests for colour fastness — F07: Specification for secondary acetate adjacent fabric
  • ISO 105-F10, Textiles — Tests for colour fastness — F10: Specification for adjacent fabric: Multifibre
  • ISO 3696, Water for analytical laboratory use — Specification and test methods

Bibliography

[1]ISO 105-C06, Textiles — Tests for colour fastness — C06: Colour fastness to domestic and commercial laundering
[2]ISO 105-C10, Textiles — Tests for colour fastness — C10: Colour fastness to washing with soap or soap and soda
[3]ISO 105-J01, Textiles — Tests for colour fastness — J01: General principles for measurement of surface colour
[4]ISO 105-J03, Textiles — Tests for colour fastness — J03: Calculation of colour differences