※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 105-E01 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 1, 着色繊維および着色剤の試験によって作成されました。
この第 6 版は、マイナー リビジョンを構成する第 5 版 (ISO 105-E01:2010) を廃止し、置き換えるものです。
ISO 105 は、一般タイトル「Textiles — Tests for color fastness」の下に、部品文字と 2 桁のシリアル番号 (例: A01) で指定された多くの部品で構成されています。これらの部品の完全なリストは ISO 105-A01 に記載されています。
1 スコープ
ISO 105 のこの部分では、あらゆる種類およびあらゆる形態の布地の色の水への浸漬に対する耐性を決定する方法が規定されています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 105-A01:2010, テキスタイル — 染色堅牢度のテスト — Part A01: テストの一般原則
- ISO 105-A02, テキスタイル — 色堅牢度のテスト — Part A02: 色の変化を評価するためのグレースケール
- ISO 105-A03, テキスタイル — 染色堅牢度のテスト — Part A03: 汚れを評価するためのグレースケール
- ISO 105-A04, 繊維 — 染色堅牢度の試験 — Part A04: 隣接する繊維の汚れの程度を機器で評価する方法
- ISO 105-A05, テキスタイル — 色堅牢度のテスト — Part A05: グレースケール評価を決定するための色の変化の機器による評価
- ISO 105-F01, テキスタイル — 染色堅牢度のテスト — Part F01: ウールに隣接する生地の仕様
- ISO 105-F02, テキスタイル — 色堅牢度のテスト — Part F02: 綿とビスコースが隣接する生地の仕様
- ISO 105-F03, テキスタイル — 色堅牢度のテスト — Part F03: ポリアミド隣接生地の仕様
- ISO 105-F04, テキスタイル — 色堅牢度のテスト — Part F04: ポリエステル隣接生地の仕様
- ISO 105-F05, テキスタイル — 色堅牢度のテスト — Part F05: アクリル隣接生地の仕様
- ISO 105-F06, テキスタイル — 染色堅牢度のテスト — Part F06: シルク隣接生地の仕様
- ISO 105-F10, テキスタイル — 色堅牢度のテスト — Part F10: 隣接する生地の仕様: マルチファイバー
- ISO 3696, 分析実験室用水 — 仕様と試験方法
参考文献
| 1 | ISO 105-J01, テキスタイル — 色堅牢度のテスト — Part J01: 表面色の測定に関する一般原則 |
| 2 | ISO 105-J03, テキスタイル — 色堅牢度のテスト — Part J03: 色差の計算 |
| 3 | AATCC TM 107, 水に対する色堅牢度 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 105-E01 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants.
This sixth edition cancels and replaces the fifth edition (ISO 105-E01:2010), of which it constitutes a minor revision.
ISO 105 consists of many parts designated by a part letter and a two-digit serial number (e.g. A01), under the general title Textiles — Tests for colour fastness. A complete list of these parts is given in ISO 105-A01.
1 Scope
This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in water.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 105-A01:2010, Textiles — Tests for colour fastness — Part A01: General principles of testing
- ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
- ISO 105-A03, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining
- ISO 105-A04, Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
- ISO 105-A05, Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating
- ISO 105-F01, Textiles — Tests for colour fastness — Part F01: Specification for wool adjacent fabric
- ISO 105-F02, Textiles — Tests for colour fastness — Part F02: Specification for cotton and viscose adjacent fabrics
- ISO 105-F03, Textiles — Tests for colour fastness — Part F03: Specification for polyamide adjacent fabric
- ISO 105-F04, Textiles — Tests for colour fastness — Part F04: Specification for polyester adjacent fabric
- ISO 105-F05, Textiles — Tests for colour fastness — Part F05: Specification for acrylic adjacent fabric
- ISO 105-F06, Textiles — Tests for colour fastness — Part F06: Specification for silk adjacent fabric
- ISO 105-F10, Textiles — Tests for colour fastness — Part F10: Specification for adjacent fabric: Multifibre
- ISO 3696, Water for analytical laboratory use — Specification and test methods
Bibliography
| 1 | ISO 105-J01, Textiles — Tests for colour fastness — Part J01: General principles for measurement of surface colour |
| 2 | ISO 105-J03, Textiles — Tests for colour fastness — Part J03: Calculation of colour differences |
| 3 | AATCC TM 107, Colorfastness to water |