※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令で指定された規則に従って起草されます。 2.
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 105-E07 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 1, 着色された繊維および着色剤の試験によって作成されました。
この第 4 版は、第 3 版 (ISO 105-E07:1989) を取り消して置き換えます。この第 2 版と第 5 版は技術的に改訂され、適切な条項に機器測定が追加されています。また、ISO 105-E07:1989/Cor.1:2002 も組み込まれています。
ISO 105 は、部分文字と 2 桁のシリアル番号 (例: A01) で指定される多くの部分で構成され、一般的なタイトルはTextiles — Tests for color fastnessです。これらの部品の完全なリストは、ISO 105-A01 に記載されています。
1 スコープ
ISO 105 のこの部分は、すべての種類およびすべての形態の布地の水による染みに対する色の耐性を決定する方法を指定します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 105-A02, テキスタイル — 色堅牢度のテスト — A02: 色の変化を評価するグレースケール
- ISO 105-A05, テキスタイル — 色堅牢度のテスト — A05: グレースケール評価を決定するための色の変化の機器評価
- ISO 3696, 分析ラボ用水 — 仕様および試験方法
参考文献
| [1] | ISO 105-A01, テキスタイル — 色堅牢度のテスト — A01: テストの一般原則 |
| [2] | ISO 105-J01, テキスタイル — 色堅牢度のテスト — J01: 表面色測定の一般原則 |
| [3] | ISO 105-J03, テキスタイル — 色堅牢度のテスト — J03: 色差の計算 |
| [4] | AATCC™ 104, 水滴に対する色堅牢度 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 105-E07 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants.
This fourth edition cancels and replaces the third edition (ISO 105-E07:1989), of which Clauses 2 and 5 have been technically revised and instrumental measurement added to the appropriate clauses. It also incorporates ISO 105-E07:1989/Cor.1:2002.
ISO 105 consists of many parts designated by a part letter and a two-digit serial number (e.g. A01), under the general title Textiles — Tests for colour fastness. A complete list of these parts is given in ISO 105-A01.
1 Scope
This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 105-A02, Textiles — Tests for colour fastness — A02: Grey scale for assessing change in colour
- ISO 105-A05, Textiles — Tests for colour fastness — A05: Instrumental assessment of change in colour for determination of grey scale rating
- ISO 3696, Water for analytical laboratory use — Specification and test methods
Bibliography
| [1] | ISO 105-A01, Textiles — Tests for colour fastness — A01: General principles of testing |
| [2] | ISO 105-J01, Textiles — Tests for colour fastness — J01: General principles for measurement of surface colour |
| [3] | ISO 105-J03, Textiles — Tests for colour fastness — J03: Calculation of colour differences |
| [4] | AATCC TM 104, Colorfastness to Water Spotting |