※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 105 のこのパートの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 105-F03 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 1, 着色された繊維および着色剤の試験によって作成されました。
この ISO 105-F03 の初版は、技術的に改訂された ISO 105-F:1985 の第 3 版のセクション F03 を取り消し、置き換えます。
ISO 105 は、1978 年から 1985 年までの発行日で、13 の「パート」に分けて発行され、それぞれがレター (「 Part A」など) で指定されていました。 2 桁のシリアル番号 (例: 「セクション A01」)これらのセクションは現在、別のドキュメントとして再発行されており、それ自体が「パーツ」と指定されていますが、以前の英数字の指定は保持されています。これらの部品の完全なリストは、ISO 105-A01 に記載されています。
1 スコープ
ISO 105 のこの部分は、染色堅ろう度試験での染色の評価に使用できる未染色のポリアミド隣接生地を指定しています。試験中のポリアミド隣接生地の染色特性は、ポリアミド染色基準生地を使用して、ポリアミド基準隣接生地に対して評価されます。どちらも指定されたソースから入手できます。
2 参考文献
以下の規範的文書には、本書で参照することにより、ISO 105 のこの部分の規定を構成する規定が含まれています。ただし、ISO 105 のこの部分に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 105-A02:1993, テキスタイル - 色堅牢度のテスト - Part A02: 色の変化を評価するためのグレー スケール。
- ISO 105-C02:1989, テキスタイル — 染色堅牢度のテスト — Part C02: 洗濯堅牢度: テスト 2 .
- ISO 105-J01:1997, テキスタイル - 色堅牢度のテスト - Part J01: 表面色の測定に関する一般原則。
- ISO 105-J02:1997, テキスタイル — 染色堅牢度のテスト — Part J02: 相対白色度の機器評価。
- ISO 3071:1980, テキスタイル — 水性抽出物の pH の測定。
- ISO 3801:1977, テキスタイル - 織物 - 単位長さあたりの質量と単位面積あたりの質量の決定。
参考文献
| 1 | ISO 105-A01:1994, テキスタイル - 色堅牢度のテスト - Part A01: テストの一般原則。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 105 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 105-F03 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants.
This first edition of ISO 105-F03 cancels and replaces Section F03 of the third edition of ISO 105-F:1985, which has been technically revised.
ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with publication dates between 1978 and 1985. Each part contained a series of “sections”, each designated by the respective part letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of these parts is given in ISO 105-A01.
1 Scope
This part of ISO 105 specifies an undyed polyamide adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the polyamide adjacent fabric under test are assessed against a polyamide reference adjacent fabric, using a polyamide dyed reference fabric, both of which are available from a specified source.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of ISO 105. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 105 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 105-A02:1993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour.
- ISO 105-C02:1989, Textiles — Tests for colour fastness — Part C02: Colour fastness to washing: Test 2.
- ISO 105-J01:1997, Textiles — Tests for colour fastness — Part J01: General principles for measurement of surface colour.
- ISO 105-J02:1997, Textiles — Tests for colour fastness — Part J02: Instrumental assessment of relative whiteness.
- ISO 3071:1980, Textiles — Determination of pH of the aqueous extract.
- ISO 3801:1977, Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area.
Bibliography
| 1 | ISO 105-A01:1994, Textiles — Tests for colour fastness — Part A01: General principles of testing. |