※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 10512 は、技術委員会 ISO/TC 2, Fasteners 、小委員会 SC 12, Fasteners with metric internal threadによって作成されました。
この第 2 版は、第 1 版 (ISO 10512:1997) を取り消して置き換えるものであり、そのマイナー リビジョンを構成します。
1 スコープ
この国際規格は、公称ねじ径Dが 8 mm から 36 mm までで、サイズDまでの製品等級 A のメトリック細目ねじを備えた、プリペンディング トルク タイプの六角レギュラー ナット (非金属インサート付き) の特性を指定します。 16 mm まで、および 16 mm を超えるサイズDの場合は製品グレード B, 特性クラス 6, 8, および 1
他の仕様が必要な場合は、ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320, ISO 4759-1 などの既存の国際規格から選択できます。
注記 1ナットの寸法は、ISO 8673 に規定されている寸法にプリベンティング トルク機能を加えたものに対応しています。
注 2細目ねじのためナット高さが不足するため、ナットのねじ山が削れる可能性が高くなります。したがって、ISO 7041 に準拠した高ナットを使用することをお勧めします。
2 参考文献
以下の文書は、全体または一部がこの文書で規範的に参照されており、その適用に不可欠です。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 225, ファスナー — ボルト、ネジ、スタッド、ナット — 記号と寸法の説明
- ISO 261, ISO 汎用メートルねじ — 一般計画
- ISO 724, ISO 汎用メートルねじ — 基本寸法
- ISO 898-2, 炭素鋼および合金鋼で作られたファスナーの機械的特性 — Part 2: 指定された特性クラスを持つナット — 並目ねじおよび細目ねじ
- ISO 965-2, ISO 汎用メートルねじ — 公差 — Part 2: 汎用おねじおよびめねじのサイズの制限 — 中品質
- ISO 2320, プリベリング トルク タイプ スチール ナット — 機械的および性能特性
- ISO 3269, ファスナー — 受け入れ検査
- ISO 4042, ファスナー — 電気メッキコーティング
- ISO 4759-1, ファスナーの公差 — Part 1: ボルト、ネジ、スタッド、およびナット — 製品グレード A, B, および C
- ISO 6157-2, ファスナー — 表面の不連続 — Part 2: ナット
- ISO 8992, Fasteners — ボルト、ネジ、スタッド、およびナットの一般要件
- ISO 10683, ファスナー - 無電解亜鉛フレークコーティング
参考文献
| [1] | ISO 8673, メートル細目ねじ付き六角レギュラー ナット (スタイル 1) — 製品グレード A および B |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10512 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.
This second edition cancels and replaces the first edition (ISO 10512:1997), of which it constitutes a minor revision.
1 Scope
This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread with nominal thread diameters, D , from 8 mm up to and including 36 mm, in product grade A for sizes D up to and including 16 mm and product grade B for sizes D above 16 mm, and with property classes 6, 8 and 10.
If other specifications are required, they can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 and ISO 4759-1.
NOTE 1 The dimensions of the nuts correspond to those given in ISO 8673 plus prevailing torque feature.
NOTE 2 As there is an insufficient nut height due to the fine pitch thread, there is a higher probability of nut thread stripping. Hence, high nuts according to ISO 7041 are preferably used.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
- ISO 261, ISO general purpose metric screw threads — General plan
- ISO 724, ISO general-purpose metric screw threads — Basic dimensions
- ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
- ISO 965-2, ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 2320, Prevailing torque type steel nuts — Mechanical and performance properties
- ISO 3269, Fasteners — Acceptance inspection
- ISO 4042, Fasteners — Electroplated coatings
- ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
- ISO 6157-2, Fasteners — Surface discontinuities — Part 2: Nuts
- ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
- ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
Bibliography
| [1] | ISO 8673, Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |