※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 10643 は、技術委員会 ISO/TC 29, 小型工具、小委員会 SC 2, 高速度鋼切削工具およびその付属品によって作成されました。
導入
多くの工具、および切削工具とその付属品用の工具ホルダーが同様のアクセサリを使用していることを考慮して、この国際規格は、モールステーパ、7/24 テーパ、中空テーパ インターフェイスなど、さまざまなタイプのインターフェイス間の通信を容易にすることを目的としています。
1 スコープ
この国際規格は、平行キー、クラッチ ドライブ リング、カッター保持ネジ、カッター保持ネジ用レンチを含む、平行キーとほぞドライブを備えたカッター アーバーの付属品の寸法を指定します。
また、その材質と名称も指定します。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 240, フライスカッター — カッターアーバーまたはカッターマンドレルの互換性寸法
- ISO 898-1, 炭素鋼および合金鋼で作られた締結具の機械的特性 - Part 1: 指定された特性クラスのボルト、ネジおよびスタッド - 並目ねじおよび細目ねじ
- ISO 2768-1, 一般公差 - Part 1: 個々の公差の表示なしの直線寸法および角度寸法の公差
- ISO 2768-2, 一般公差 - Part 2: 個々の公差の表示がない形状の幾何公差
参考文献
| 1 | ISO 2780, ほぞドライブ付きフライス — カッターアーバーの互換性寸法 — メートル系シリーズ |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10643 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 2, High speed steel cutting tools and their attachments.
Introduction
Given that many tools, as well as tool holders for cutting tools and their attachments, use similar accessories, this International Standard is intended to facilitate communication among different types of interface such as Morse taper, 7/24 taper and hollow taper interface.
1 Scope
This International Standard specifies the dimensions of accessories for cutter arbors with parallel key and tenon drive including parallel key, clutch drive ring, cutter retaining screws and the wrench for cutter retaining screws.
Its also specifies their material and designation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 240, Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
- ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 2768-1, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2, General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
Bibliography
| 1 | ISO 2780, Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series |