※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 10673 は、技術委員会 ISO/TC 2, ファスナー、小委員会 SC 10, ファスナーの製品規格によって作成されました。
この第 2 版は、技術的に改訂された第 1 版 (ISO 10673:1998) を廃止し、置き換えます。
1 スコープ
国際規格は、ISO 10644 に従って、メートルねじとワッシャーのアセンブリ用の製品グレード A の普通鋼ワッシャー、小型、標準、および大型シリーズの特性を指定します。
注1本製品は第5項に規定する条件下で製造することができます。
注 2ねじと座金の組立品の製造では、仕様要求を満たすために、ねじと平座金の材質と製造手順、および部品の組立工程が考慮されます。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 3269, ファスナー - 受け入れ検査
- ISO 4759-3, 締結部品の公差 - Part 3: ボルト、ネジ、ナット用の平座金 - 製品グレード A および C
- ISO 6507-1, 金属材料 — ビッカース硬さ試験 — Part 1: 試験方法
- ISO 10644:2009, 平ワッシャーを備えたスチール製のネジとワッシャーのアセンブリ - ワッシャー硬度クラス 200 HV および 300 HV
参考文献
| 1 | ISO 6507-2, 金属材料 — ビッカース硬さ試験 — Part 2: 試験機の検証および校正 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10673 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 10, Product standards for fasteners.
This second edition cancels and replaces the first edition (ISO 10673:1998), which has been technically revised.
1 Scope
The International Standard specifies the characteristics of plain steel washers, small, normal and large series, of product grade A for metric screw and washer assemblies in accordance with ISO 10644.
NOTE 1 The product can be manufactured under the conditions defined in Clause 5.
NOTE 2 The manufacturing of screw and washer assemblies takes into consideration material and production procedure of screw and plain washer as well as the assembly process of components, in order to meet specification requirements.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 3269, Fasteners — Acceptance inspection
- ISO 4759-3, Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product grades A and C
- ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method
- ISO 10644:2009, Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
Bibliography
| 1 | ISO 6507-2, Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |