※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 10713 は、技術委員会 ISO/TC 174, ジュエリーによって作成されました。
1 スコープ
この国際規格は、コーティングの厚さの要件とコーティングの金の細かさを指定します。また、金合金コーティングに関する現在の用語も定義しています。
ケースに恒久的に取り付けられている時計のブレスレットには適用されません。
2 参考文献
次の規格には規定が含まれており、このテキストで参照することにより、この国際規格の規定を構成します。発行の時点で、示されている版は有効でした。すべての規格は改訂される可能性があり、この国際規格に基づく契約の当事者は、以下に示す規格の最新版を適用する可能性を調査することをお勧めします。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3160-2:1982, 時計ケースおよび付属品 - 金合金被覆 - Part 2: 細かさ、厚さ、および耐食性の測定。
- ISO 3497:1990, メタリック コーティング - コーティングの厚さの測定 - X 線分光法。
- ISO 3543:1981, 金属および非金属コーティング - 厚さの測定 - ベータ後方散乱法。
- ISO 9220:1988, メタリック コーティング - コーティングの厚さの測定 - 走査型電子顕微鏡法。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 10713 was prepared by Technical Committee ISO/TC 174, Jewellery.
1 Scope
This International Standard specifies the coating thickness requirements and the gold fineness of the coating. It also defines current terms concerning gold alloy coatings.
It is not applicable to watch bracelets if they are permanently attached to the case.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3160-2:1982, Watch cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness and corrosion resistance.
- ISO 3497:1990, Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods.
- ISO 3543:1981, Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method.
- ISO 9220:1988, Metallic coatings — Measurement of coating thickness — Scanning electron microscope method.