※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って起草されています。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 10768 は、技術委員会 ISO/TC 216, Footwearと技術委員会 CEN/TC 309, Footwearが協力して、ウィーン協定に従って作成されました。
1 スコープ
この国際規格は、履物用の弾性材料の、通常の歩行中に生じる繰り返しの伸展に対する耐性を決定するための試験方法を規定しています。この試験は、加速老化の前後に実施できます。この方法は、履物に使用されるあらゆる弾性材料に適用できます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
3.1
弾性
伸びて元の形に戻るゴムまたは類似の物質を含むテープ、コード、または布
注記 1:一般に、四分の一の上部構造または靴を足に保持するストラップに伸縮性のある素材が使用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10768 was prepared by Technical Committee ISO/TC 216, Footwear and by Technical Committee CEN/TC 309, Footwear in collaboration, in accordance with the Vienna Agreement.
1 Scope
This International Standard specifies a test method for the determination of the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 10765, Footwear — Test method for the characterization of elastic materials — Tensile performance
- ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
elastic
tape, cord or fabric containing rubber or a similar substance allowing it to stretch and return to its original shape
Note 1 to entry: Generally elastic materials are used in upper construction in the quarters or in the straps to hold the shoe on the foot.