※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 10972-5 は、技術委員会 ISO/TC 96, クレーン、小委員会 SC 9, 橋梁およびガントリー クレーンによって作成されました。
ISO 10972 は、 「クレーン — メカニズムの要件」という一般タイトルの下に、次の部分で構成されています。
- Part 1: 一般
- Part 3: タワークレーン
- Part 4: ジブクレーン
- Part 5: ブリッジ クレーンとガントリー クレーン
1 スコープ
ISO 10972 のこの部分は、ISO 4306-1 で定義されているように、橋梁クレーンおよびガントリー クレーンの機構に関する特定の要件を確立します。クレーンの機構に関する一般要件は ISO 10972-1 に規定されています。
これらの特定の要件は、
- a)メカニズムの一般的なレイアウトと設計。
- b)コンポーネントの選択および/または設計要件。
- c)製造、取り付け、設置およびテストに関する指示。
さまざまな限界状態 (降伏強度、疲労、摩耗) に関する能力証明計算のルールは、ISO 10972 のこの部分から除外されています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 4306-1, クレーン - 語彙 - Part 1: 一般
- ISO 10245-5, クレーン — 制限および表示装置 — Part 5: 天井走行クレーンおよび門型橋クレーン
- ISO 10972-1, クレーン — 機構の要件 — Part 1: 一般
- ISO 12210-1, クレーン — 稼働中および稼働停止時のアンカー装置 — Part 1: 一般
- ISO 12488-1, クレーン — 車輪、走行および横断軌道の公差 — Part 1: 一般
- IEC 60204-32, 機械の安全性 - 機械の電気機器 - Part 32: 巻上機の要件
3 用語と定義
この文書の目的には、ISO 4306-1 に示されている用語と定義が適用されます。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10972-5 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 9, Bridge and gantry cranes.
ISO 10972 consists of the following parts, under the general title Cranes — Requirements for mechanisms:
- Part 1: General
- Part 3: Tower cranes
- Part 4: Jib cranes
- Part 5: Bridge and gantry cranes
1 Scope
This part of ISO 10972 establishes the particular requirements relating to mechanisms for bridge and gantry cranes, as defined in ISO 4306-1. The general requirements for mechanisms for cranes are given in ISO 10972-1.
These particular requirements concern
- a) the general layout and design of mechanisms;
- b) the selection and/or design requirements of components;
- c) the instructions for manufacturing, mounting, installation and testing.
Rules for proof of competence calculations regarding different limit states (yield strength, fatigue, wear) are excluded from this part of ISO 10972.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 4306-1, Cranes — Vocabulary — Part 1: General
- ISO 10245-5, Cranes — Limiting and indicating devices — Part 5: Overhead travelling and portal bridge cranes
- ISO 10972-1, Cranes — Requirements for mechanisms — Part 1: General
- ISO 12210-1, Cranes — Anchoring devices for in-service and out-of-service conditions — Part 1: General
- ISO 12488-1, Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
- IEC 60204-32, Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 4306-1 apply.