※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 11091 は、技術委員会 ISO/TC 10, 技術図面、製品定義および関連文書、小委員会 SC 8, 建設文書によって作成されました。
この国際規格の付属書 A および付属書 B は情報提供のみを目的としています。
1 スコープ
この国際規格は、一般的な規則を確立し、風景描画の練習のための図記号と簡略化された表現を指定します。
図記号と簡略化された表現を合わせて規約と呼びます。風景図に適用される国際規格の規則は、付録 A に示されています。
付録B
参考文献
| 1 | ISO 128:1982, 技術図面 — 表示の一般原則。 |
| 2 | ISO 129:1985, 技術図面 — 寸法 — 一般原則、定義、実行方法、および特別な表示。 |
| 3 | ISO 3098-1:1974, 技術図面 — レタリング — Part 1: 現在使用されている文字。 |
| 4 | ISO 4067-1:1984, 技術図面 — 設置 — Part 1: 配管、暖房、換気およびダクトの図記号。 |
| 5 | ISO 4067-6:1985, 技術図面 — 設置 — Part 6: 地中の給水および排水システムの図記号。 |
| 6 | ISO 4068:1978, 建築および土木図面 - 基準線。 |
| 7 | ISO 4069:1977, 建築および土木図面 - 断面およびビュー上の領域の表現 - 一般原則。 |
| 8 | ISO 5455:1979, 技術図面 - スケール。 |
| 9 | ISO 5457:1980, 技術図面 - 図面シートのサイズとレイアウト |
| 10 | ISO 6428:1982, 技術図面 - マイクロコピーの要件。 |
| 11 | ISO 7200:1984, 技術図面 - タイトルブロック。 |
| 12 | ISO 7518:1983, 技術図面 — 建設図面 — 解体と再建の簡略化された表現。 |
| 13 | ISO 7519:1991, 技術図面 — 構造図面 — 一般配置図および組立図の表示の一般原則。 |
| 14 | ISO 8048:1984, 技術図面 — 建設図面 — ビュー、断面、およびカットの表現。 |
| 15 | ISO 9431:1990, 建設図面 - 図面シート上の図面、テキスト、表題欄用のスペース。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11091 was prepared by Technical Committee ISO/TC 10, Technical drawings, product definition and related documentation, Subcommittee SC 8, Construction documentation.
Annexes A and B of this International Standard are for information only.
1 Scope
This International Standard establishes general rules and specifies graphical symbols and simplified representations for landscape drawing practice.
The graphical symbols and simplified representation are jointly referred to as conventions. The conventions given in International Standards which are applicable to landscape drawings are presented in annex A.
Annex B
Bibliography
| 1 | ISO 128:1982, Technical drawings — General principles of presentation. |
| 2 | ISO 129:1985, Technical drawings — Dimensioning — General principles, definitions, methods of execution and special indications. |
| 3 | ISO 3098-1:1974, Technical drawings — Lettering — Part 1: Currently used characters. |
| 4 | ISO 4067-1:1984, Technical drawings — Installations — Part 1: Graphical symbols for plumbing, heating, ventilation and ducting. |
| 5 | ISO 4067-6:1985, Technical drawings — Installations — Part 6: Graphical symbols for supply water and drainage systems in the ground. |
| 6 | ISO 4068:1978, Building and civil engineering drawings — Reference lines. |
| 7 | ISO 4069:1977, Building and civil engineering drawings — Representation of areas on sections and views — General principles. |
| 8 | ISO 5455:1979, Technical drawings — Scales. |
| 9 | ISO 5457:1980, Technical drawings — Sizes and layout of drawing sheets |
| 10 | ISO 6428:1982, Technical drawings — Requirements for microcopying. |
| 11 | ISO 7200:1984, Technical drawings — Title blocks. |
| 12 | ISO 7518:1983, Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding. |
| 13 | ISO 7519:1991, Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings. |
| 14 | ISO 8048:1984, Technical drawings — Construction drawings — Representation of views, sections and cuts. |
| 15 | ISO 9431:1990, Construction drawings — Spaces for drawing and for text, and title blocks on drawing sheets. |