ISO 11111-3:2005 繊維機械—安全要件—パート3：不織布機械 | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 11111-3 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-cleaning and industrial laundering, Subcommittee SC 8, Safety requirements for textile machinery.

This first edition of ISO 11111-3, together with ISO 11111-1, ISO 11111-2, ISO 11111-4, ISO 11111-5, ISO 11111-6 and ISO 11111-7, cancels and replaces ISO 11111:1995, which has been technically revised.

ISO 11111 consists of the following parts, under the general title Textile machinery — Safety requirements:

• Part 1: Common requirements
• Part 2: Spinning preparatory and spinning machines
• Part 3: Nonwoven machinery
• Part 4: Yarn processing, cordage and rope manufacturing machinery
• Part 5: Preparatory machinery to weaving and knitting
• Part 6: Fabric manufacturing machinery
• Part 7: Dyeing and finishing machinery

Introduction

ISO 11111-1 to ISO 11111-7 were prepared simultaneously by ISO/TC 72 and CEN/TC 214 and adopted under the Vienna Agreement in order to obtain identical standards on technical safety requirements for the design and construction of textile machinery.

ISO 11111 as a whole is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers and systems integrators. It is also of interest to users of textile machinery and safety experts.

This document is a type C standard as stated in ISO 12100-1. The various parts of ISO 11111 deal with significant hazards generated by machines used in the textile industry. The machinery concerned and the extent to which hazards are covered are indicated in the scope of this standard.

When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence.

For hazards of machines or machine elements not dealt with in the relevant part of ISO 11111, the designer is to perform a risk assessment according to ISO 14121 and evolve means for reducing the risk from significant hazards.

This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1. As far as possible, the requirements of this part of ISO 11111 are treated by way of reference to Clauses 5 and 6 of ISO 11111-1. Clause 5 of ISO 11111-1 contains safety requirements and/or measures for frequently occurring hazards of textile machinery which apply whenever referred to in this part of ISO 11111, while Clause 6 describes significant hazards and corresponding safety requirements and/or measures for certain machine elements and their combinations (e.g. rollers), which also apply whenever referred to in this part of ISO 11111.

1 Scope

This part of ISO 11111 is intended to be used in conjunction with ISO 11111-1, ISO 11111-2, ISO 11111-6 and ISO 11111-7. It specifies significant hazards and corresponding safety requirements and/or measures for nonwoven machinery. By taking into account the scope of ISO 11111-1 as far as is relevant, this part of ISO 11111 is applicable to all machinery, plant and related equipment intended to be used for opening, cleaning, blending, carding, needle punching, cylinder drying and batching, as specified in Clause 5.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this part of ISO 11111, the terms and definitions given in ISO 11111-1 apply.

Bibliography