※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 1113 は、技術委員会 ISO/TC 97, コンピュータおよび情報処理によって開発されました。この第 2 版は、1978 年 2 月に加盟団体に配布されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | ドイツ、フランス | 南アフリカ共和国 |
| ベルギー | イラン | スペイン |
| ブラジル | イタリア | スイス |
| カナダ | 日本 | 七面鳥 |
| チェコスロバキア | オランダ | イギリス |
| デンマーク | ポーランド | ソビエト連邦 |
| フランス | ルーマニア |
この文書の不承認を表明した加盟団体はありませんでした。
この第 2 版は、第 1 版 (ISO 1113-1973) を取り消して置き換えるものです。
1 適用範囲と適用分野
この国際規格は、幅 25.4 mm (1 インチ) のパンチ テープでの 7 ビット コード化文字セットの表現を指定します。
2 参考文献
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1113 was developed by Technical Committee ISO/TC 97, Computers and information processing. This second edition was circulated to the member bodies in February 1978.
It has been approved by the member bodies of the following countries:
| Australia | Germany, F. R. | South Africa, Rep. of |
| Belgium | Iran | Spain |
| Brazil | Italy | Switzerland |
| Canada | Japan | Turkey |
| Czechoslovakia | Netherlands | United Kingdom |
| Denmark | Poland | U.S.S.R. |
| France | Romania |
No member body expressed disapproval of the document.
This second edition cancels and replaces the first edition (ISO 1113-1973).
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies the representation of the 7-bit coded character set on punched tape 25,4 mm (1 in) wide.
2 REFERENCES
- ISO 646, 7-bit coded character set for information processing interchange.
- ISO 1154, Information processing — Punched paper tape — Dimensions and locations of feed holes and code holes.
- ISO 1729, Information processing — Unpunched paper tape — Specification.