※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
適合性評価に関連する ISO 固有の用語および表現の意味に関する説明、および技術的貿易障壁 (TBT) における WTO 原則への ISO の準拠に関する情報については、次の URL を参照して ください 。
この文書を担当する委員会は、ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 3, ゴム産業で使用するための原材料 (ラテックスを含む) です。
この第 4 版は、マイナー リビジョンを構成する第 3 版 (ISO 1125:1999) を取り消して置き換えます。また、ISO 1125:1999/Amd.1:2011 も組み込まれています。
修正には、規範的参照の更新 (箇条 2 および本文全体)、有益な付属書の精度データの移動、参考文献の追加が含まれます。
警告この国際規格を使用する人は、通常の実験室の慣行に精通している必要があります。この規格は、その使用に関連する安全上の問題があったとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、国内の規制条件を確実に遵守することは、ユーザーの責任です。
1 スコープ
この国際規格は、ゴム産業で使用するすべての種類のカーボン ブラックの灰分を測定する方法を指定しています。
2 参考文献
以下の文書の全体または一部は、この文書で規範的に参照されており、その適用に不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1124, ゴム配合成分 — カーボンブラック出荷サンプリング手順
参考文献
| [1] | ISO/TR 9272:2005, ゴムおよびゴム製品 - 試験方法規格の精度の決定 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee SC 3, Raw materials (including latex) for use in the rubber industry.
This fourth edition cancels and replaces the third edition (ISO 1125:1999), of which it constitutes a minor revision. It also incorporates ISO 1125:1999/Amd.1:2011.
The modifications include updating the normative references (in Clause 2 and throughout the text), moving precision data in an informative annex and adding a Bibliography.
WARNING Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This International Standard specifies a method for determining the ash of all types of carbon black for use in the rubber industry.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1124, Rubber compounding ingredients — Carbon black shipment sampling procedures
Bibliography
| [1] | ISO/TR 9272:2005, Rubber and rubber products — Determination of precision for test method standards |