※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
この文書の開発に使用された手順と、今後の維持のために意図された手順は、ISO/IEC 指令で説明されています。 1. 特に、さまざまなタイプの ISO 文書に必要なさまざまな承認基準に注意する必要があります。この文書は、ISO/IEC 指令の編集規則に従って作成されました。 2 ( www.iso.org/directives を参照)
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部またはすべてを特定する責任を負わないものとします。ドキュメントの開発中に特定された特許権の詳細は、序文および/または受信した特許宣言の ISO リストに記載されます ( www.iso.org/patents を参照)
このドキュメントで使用されている商号は、ユーザーの便宜のために提供された情報であり、保証を構成するものではありません。
規格の自主的な性質の説明、適合性評価に関連する ISO 固有の用語と表現の意味、および技術的貿易障壁 (TBT) における世界貿易機関 (WTO) の原則への ISO の準拠に関する情報については、以下を参照してください。 www.iso.org/iso/foreword.html .
この文書は、技術委員会 ISO/TC 61, Plastics , Subcommittee SC 11, Productsが、欧州標準化委員会 (CEN) Technical Committee CEN/TC 193, Adhesivesと協力して、ISO 間の技術協力に関する協定に従って作成したものです。および CEN (ウィーン協定)
この第 4 版は、マイナー リビジョンを構成する第 3 版 (ISO 11339:2010) を取り消して置き換えます。
変更点は次のとおりです。
- a) 「剥離強度」という用語は、本文全体で「剥離抵抗」という用語に置き換えられます。
- b)本文が編集上改訂され、参考文献が更新されました。
安全に関する声明この文書を使用する人は、該当する場合、通常の実験室の慣行に精通している必要があります。このドキュメントは、その使用に関連する安全上の問題のすべてに対処することを目的としていません。適切な安全衛生慣行を確立し、使用前に規制条件の適用可能性を判断することは、ユーザーの責任です。
この文書で許可されている材料の一部は、環境に悪影響を与える可能性があることが認識されています。技術の進歩により、そのような材料の代替品がより受け入れられるようになるにつれて、それらは可能な限り排除されます。
試験終了時には、すべての廃棄物を適切な方法で処分するように注意する必要があります。
1 スコープ
この文書は、2 つの柔軟な被着体の T 字型接合アセンブリの剥離力を測定することにより、接着剤の剥離抵抗を決定するための T 剥離試験を規定しています。このテスト手順は設計情報を提供しません。
注記この方法は、もともと金属被着体で使用するために開発されましたが、他の柔軟な被着体も使用できます。
2 参考文献
以下のドキュメントは、その内容の一部またはすべてがこのドキュメントの要件を構成するように、テキスト内で参照されています。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
3 用語と定義
このドキュメントでは、次の用語と定義が適用されます。
ISO および IEC は、次のアドレスで標準化に使用する用語データベースを維持しています。
3.1
耐剥離性
剥離モードで適用される応力によって接着接合部を破損点に至らせるか、または破損率を維持するために必要な単位幅あたりの力。
注記 1:剥離抵抗は、単位剥離幅あたりの力として表すことができます。
[出典:ISO 472:2013, 2.683, modified — 注記の「剥離強度」を「剥離抵抗」に置き換えた。]
3.2
柔軟な被着体
被着体:壊れたりひび割れたりせずに 90°までの任意の角度で曲げることができる寸法と物理的特性を持つ被着体。
参考文献
| [1] | ISO 209, アルミニウムおよびアルミニウム合金 — 化学組成 |
| [2] | ISO 472:2013, プラスチック - 語彙 |
| [3] | ISO 2107, アルミニウムおよびアルミニウム合金 — 鍛造品 — 焼き戻し指定 |
| [4] | ISO 5893, ゴムおよびプラスチック試験装置 — 引張、曲げ、および圧縮タイプ (一定のトラバース速度) — 仕様 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, 1. In particular, the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, 2 (see www.iso.org/directives ).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents ).
Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 193, Adhesives, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 11339:2010), of which it constitutes a minor revision.
The changes are as follows:
- a) the term “peel strength” is replaced by the term “peel resistance” in the whole text;
- b) the text has been editorially revised and the references has been updated.
SAFETY STATEMENT Persons using this document should be familiar with normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and determine the applicability of any regulatory conditions prior to use.
It is recognized that some of the materials permitted in this document may have a negative environmental impact. As technological advances lead to more acceptable alternatives for such materials, they will be eliminated to the greatest extent possible.
At the end of the test, care should be taken to dispose of all waste in an appropriate manner.
1 Scope
This document specifies a T‑peel test for the determination of the peel resistance of an adhesive by measuring the peeling force of a T‑shaped bonded assembly of two flexible adherends. This test procedure does not provide design information.
NOTE This method was originally developed for use with metal adherends but other, flexible, adherends can also be used.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 291, Plastics — Standard atmospheres for conditioning and testing
- ISO 10365, Adhesives — Designation of main failure patterns
- ISO 17212, Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
3.1
peel resistance
force per unit width necessary to bring an adhesive joint to the point of failure or to maintain a rate of failure by means of a stress applied in the peeling mode
Note 1 to entry: The peel resistance can be expressed as force per unit peel width.
[SOURCE:ISO 472:2013, 2.683, modified — “peel strength” is replaced by “peel resistance” in the Note.]
3.2
flexible adherend
adherend having dimensions and physical properties that permit bending through any angle up to 90° without breaking or cracking
Bibliography
| [1] | ISO 209, Aluminium and aluminium alloys — Chemical composition |
| [2] | ISO 472:2013, Plastics — Vocabulary |
| [3] | ISO 2107, Aluminium and aluminium alloys — Wrought products — Temper designations |
| [4] | ISO 5893, Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification |