※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令Part 2 部に規定されている規則に従って草案されています。
技術委員会の主な任務は、国際規格を作成することです。技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
この文書の要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、かかる特許権の一部またはすべてを特定する責任を負わないものとします。
ISO 11485-2 は、技術委員会 ISO/TC 160, 建物のガラス、小委員会 SC 1, 製品の考慮事項によって作成されました。
ISO 11485 は、 「建物のガラス — 曲面ガラス」という一般タイトルのもと、次の部分で構成されています。
- Part 1: 用語と定義
- Part 2: 品質要件
- Part 3: 強化および積層曲面安全ガラスの要件1
1 スコープ
ISO 11485 のこの部分では、一般的な建築構造、家具、ディスプレイ、その他の自動車以外のさまざまな用途に使用される曲面ガラスの品質要件を指定しています。
2 規範的参照
この文書を適用するためには、以下の参照文書が不可欠です。日付が記載された参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 11485-1, 建物のガラス — 曲面ガラス — Part 1: 用語と定義
3 用語と定義
この文書の目的には、ISO 11485-1 に示されている用語と定義が適用されます。
参考文献
| 1 | ASTM C1464-06, 曲げガラスの標準仕様 |
| 2 | ISO 1629, 建物のガラス — 基本的なソーダ石灰ケイ酸塩ガラス製品 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11485-2 was prepared by Technical Committee ISO/TC 160, Glass in building, Subcommittee SC 1, Product considerations.
ISO 11485 consists of the following parts, under the general title Glass in building — Curved glass:
- Part 1: Terminology and definitions
- Part 2: Quality requirements
- Part 3: Requirements for tempered and laminated curved safety glass1
1 Scope
This part of ISO 11485 specifies the quality requirements for curved glass used in general building construction, furniture, display and various other non-automotive applications.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 11485-1, Glass in building — Curved glass — Part 1: Terminology and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11485-1 apply.
Bibliography
| 1 | ASTM C1464-06, Standard Specifications for Bent Glass |
| 2 | ISO 16293 (all parts), Glass in building — Basic soda lime silicate glass products |