※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 1155 は、技術委員会 ISO/TC 97, コンピュータおよび情報処理によって開発されました。
この第 2 版は、ISO の技術業務に関する指令の 6.13.1 節に従って、ISO 理事会に直接提出されました。これは、以下の国のメンバー団体によって承認されていた初版 (つまり、ISO 1155-1973) を取り消して置き換えます。
| オーストラリア | ドイツ、フランス | ルーマニア |
| ベルギー | ギリシャ | スペイン |
| ブラジル | イスラエル | スウェーデン |
| カナダ | イタリア | スイス |
| チェコスロバキア | 日本 | タイ |
| デンマーク | ニュージーランド | イギリス |
| エジプト、アラブ共和国 | ペルー | アメリカ |
| フランス | ポーランド | ソビエト連邦 |
この文書の不承認を表明した加盟団体はありませんでした。
0 はじめに
データ通信システムでは、送信されるデータの情報形式と冗長性はアプリケーションごとに大きく異なります。したがって、多くのクラスのエラー保護システムが必要になる可能性があることは明らかです。
この国際規格は、幅広いアプリケーションを満たすエラー検出の 1 つの方法を定義します。これは、データ ブロックまたはテキストに (文字パリティに加えて) 1 つのチェック文字を付加することで構成され、「縦方向パリティ法」と呼ばれることがよくあります。
1 適用範囲と適用分野
この国際規格は、送信された情報ブロック (またはテキスト) に 1 つのブロック チェック文字を付加し、受信時にこの文字をチェックすることによって、情報メッセージのエラーを検出する方法を指定します。より高いレベルで実行されます。
この方法は、ISO 646 の主題である7 ビット符号化文字セット、情報処理交換用の 7 ビット符号化文字セット、およびデータ通信システムでこの 7 ビット コードを実装する基本モードを使用するシステムに適用できます。これは、ISO 1745「情報処理 — データ通信システムの基本モード制御手順」の主題です。
ISO 1177 によると、文字パリティ ビットを生成するための規則は、開始/停止および同期伝送のための情報処理 - 文字構造であり、文字パリティ センスは同期システムでは奇数であり、非同期システムでも奇数である必要があります。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 1155 was developed by Technical Committee ISO/TC 97, Computers and information processing.
This second edition was submitted directly to the ISO Council, in accordance with clause 6.13.1 of the Directives for the technical work of ISO. It cancels and replaces the first edition (i.e. ISO 1155-1973), which had been approved by the member bodies of the following countries:
| Australia | Germany,F.R. | Romania |
| Belgium | Greece | Spain |
| Brazil | Israel | Sweden |
| Canada | Italy | Switzerland |
| Czechoslovakia | Japan | Thailand |
| Denmark | New Zealand | United Kingdom |
| Egypt, Arab Rep. of | Peru | U.S.A. |
| France | Poland | U.S.S.R. |
No member body had expressed disapproval of the document.
0 INTRODUCTION
In data communication systems the information formatsand the redundancy in the data to be transmitted differwidely from one application to another. It is therefore clearthat a number of classes of error protection systems may berequired.
This International Standard defines one method of errordetection which satisfies a wide range of applications. Itconsists of accompanying the data block or text by onechecking character (in addition to character parity) and it isoften referred to as the “Longitudinal Parity Method".
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies a method fordetecting errors in information messages by attaching oneblock check character to the transmitted information block(or text) and checking this character when it is received.The method of correcting errors when they are detected issubject to the particular application and is performed at ahigher level.
The method is applicable to systems which use the 7-bitcoded character set which is the subject of ISO 646, 7-bit coded character set for information processing interchange,and the basic mode of implementing this 7-bit code in datacommunication systems, which is the subject of ISO 1745, Information processing — Basic mode control procedures for data communication systems.
The rules for generating the character parity bits, accordingto ISO 1177, Information processing — Character structurefor start/stop and synchronous transmission, are that thecharacter parity sense shall be odd in synchronous systemsand even in asynchronous systems.