※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 11634 は、技術委員会 ISO/TC 83, スポーツおよびレクリエーション用具、分科会 SC 3, スキービンディングによって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
1 スコープ
この国際規格は、スノーボード バインディングの定義された取り付け条件を提供するために、クランプ用のインターフェイスを備えたスノーボード ブーツのソールとシャフトの一部のインターフェイス ゾーンの寸法と特性を指定します。
スノーボード ブーツをボードに取り付けるための他のシステムが存在する可能性がありますが、これらはまだこの国際規格ではカバーされていません。
モンドポイント システムではサイズ 15.0 以上のスノーボード ブーツに適用されます。
アルペン スキー ブーツは ISO 53551 [1] でカバーされ、ツーリング スキー ブーツは ISO 9523 [2] でカバーされます。
2 基準参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 2768-1:1989, 一般公差 - Part 1: 個別の公差の表示がない直線寸法および角度寸法の公差。
3 つの定義
この国際規格の目的のために、次の定義が適用されます。
3.1
インターフェース
スノーボードビンディングと接触し、スノーボードビンディングの機能を提供する領域。
3.2
縦正中面
ソールの中間面で、長手方向で座面に対して垂直です。
3.3
座面
ブーツが立っている面と接触するブーツソールの表面。
付録A
参考文献
| 1 | ISO 5355:1991, アルペン スキー ブーツ - 安全要件とテスト方法。 |
| 2 | ISO 9523:1990, 大人用ツーリング スキーブーツ — スキービンディングとのインターフェース。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11634 was prepared by Technical Committee ISO/TC 83, Sports and recreational equipment, Subcommittee SC 3, Ski bindings.
Annex A of this International Standard is for information only.
1 Scope
This International Standard specifies the dimensions and characteristics of the interface zone of the sole and parts of the shaft of snowboard-boots, with an interface for clamping, to provide defined attachment conditions for the snowboard-binding.
There may be other systems to attach the snowboard-boot to the board, which are not yet covered by this International Standard.
It applies to snowboard-boots of sizes 15,0 and larger in the Mondopoint system.
Alpine ski-boots are covered in ISO 53551 [1] and touring ski-boots in ISO 9523 [2]
2 Normative reference
The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 2768-1:1989, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications.
3 Definitions
For the purposes of this International Standard, the following definitions apply.
3.1
interface
Area which is in contact with the snowboard-binding and which provides the function of the snowboard-binding.
3.2
longitudinal median plane
Middle plane of the sole, longitudinal and perpendicular to the bearing surface.
3.3
bearing surface
Surface of the boot sole which is in contact with a plane on which the boot is standing.
Annex A
Bibliography
| 1 | ISO 5355:1991, Alpine ski-boots — Safety requirements and test methods. |
| 2 | ISO 9523:1990, Touring ski-boots for adults — Interface with ski-binding. |