※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って起草されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 1167-3 は、技術委員会 ISO/TC 138, 流体の輸送のためのプラスチック パイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブの一般的な特性およびそれらの付属品 — 試験方法および基本仕様によって作成されました。 .
ISO 1167-3 のこの初版は、ISO 1167-2 とともに、ISO 12092:2000 を取り消して置き換え、そのうちの技術改訂を構成します。
ISO 1167-3 は、次の部分で構成されており、一般的なタイトルは、熱可塑性パイプ、継手、および流体搬送用アセンブリ - 内部圧力に対する抵抗の決定:
- Part 1: 一般的な方法
- Part 2: パイプ試験片の準備
- Part 3: コンポーネントの準備
- Part 4: アセンブリの準備
1 スコープ
ISO 1167 のこの部分では、ISO 1167-1 に従って内部静水圧に対する抵抗を決定するために、部品、つまり継手およびバルブ本体の準備手順を指定しています。
注記バットフュージョン、エレクトロフュージョン、およびソケットフュージョン用のポリオレフィンフィッティングは、通常、アセンブリとしてテストされ、ISO 1167-4 で処理されます。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 1167-1:2006, 流体を搬送するための熱可塑性パイプ、継手およびアセンブリ — 内部圧力に対する抵抗の決定 — Part 1: 一般的な方法
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1167-3 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
This first edition of ISO 1167-3, together with ISO 1167-2, cancels and replaces ISO 12092:2000, of which it constitutes a technical revision.
ISO 1167-3 consists of the following parts, under the general title Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure:
- Part 1: General method
- Part 2: Preparation of pipe test pieces
- Part 3: Preparation of components
- Part 4: Preparation of assemblies
1 Scope
This part of ISO 1167 specifies the procedure for the preparation of components, i.e. fittings and valve bodies, for the determination of their resistance to internal hydrostatic pressure according to ISO 1167-1.
NOTE Polyolefin fittings for butt fusion, electrofusion and socket fusion are usually tested as an assembly and are treated in ISO 1167-4.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 1167-1:2006, Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method