※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
この国際規格の一部の要素が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 11752 は、技術委員会 ISO/TC 45, ゴムおよびゴム製品、小委員会 SC 4, 製品 (ホース以外)によって作成されました。
警告 — この国際規格を使用する人は、通常の実験室の慣行に精通している必要があります。この規格は、その使用に関連する安全上の問題があったとしても、そのすべてに対処することを意図していません。適切な安全衛生慣行を確立し、国内の規制条件を確実に遵守することは、ユーザーの責任です。
1 スコープ
この国際規格は、厚さ 3 mm 以上の柔軟な気泡ポリマー プロファイルの圧縮および/または変形力を測定することにより、材料の硬度または圧縮率を決定する方法を指定します。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 ISO および IEC のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 471:1995, ゴム - コンディショニングとテストの温度、湿度、および時間。
- ISO 1923:1981, セルラー プラスチックおよびゴム — 直線寸法の決定。
- ISO 5893:1993, ゴムおよびプラスチック試験装置 — 引張り、曲げおよび圧縮タイプ (トラバースの一定速度) — 説明。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 11752 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 4, Products (other than hoses).
WARNING — Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This International Standard specifies a method of determining the hardness or compressibility of a material by measuring the compression and/or deformation force on flexible cellular polymeric profiles not less than 3 mm thick.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
- ISO 471:1995, Rubber — Temperatures, humidities and times for conditioning and testing.
- ISO 1923:1981, Cellular plastics and rubbers — Determination of linear dimensions.
- ISO 5893:1993, Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Description.