※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に回覧されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 11857 は、技術委員会 ISO/TC 38, 繊維、小委員会 SC 12, 繊維床材によって作成されました。
1 スコープ
この国際規格は、繊維床材のプライを分離するために必要な力を決定する方法を説明しています。二次またはフォームバッキングを備えたすべてのタイプのテキスタイル床材に適用できます。
この方法で得られた結果は、生産の管理としては有用ですが、使用中のパフォーマンスの信頼できる指標とはみなされません。
2 参考文献
次の規範文書には、このテキストで参照することにより、この国際規格の規定を構成する規定が含まれています。日付の記載された参考資料については、これらの刊行物に対するその後の修正または改訂は適用されません。ただし、この国際規格に基づく協定の当事者は、以下に示す規範文書の最新版を適用する可能性を調査することをお勧めします。日付のない参照については、参照されている規範文書の最新版が適用されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
3 定義
この国際規格の目的のために、次の定義が適用されます。
3.1
剥離力
幅 50 mm で測定され、ニュートンで表される、テキスタイル床材の構成層を分離するのに必要な力。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard 11857 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 12, Textile floor coverings.
1 Scope
This International Standard describes a method for the determination of the force required to separate the plies of textile floor coverings. It is applicable to all types of textile floor coverings with a secondary or foam backing.
The results obtained by this method are useful as a control of production but cannot be considered to be a reliable indication of in-use performance.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 139, Textiles — Standard atmospheres for conditioning and testing.
- ISO 1957, Machine-made textile floor coverings — Sampling and cutting specimens for physical tests.
3 Definition
For the purpose of this International Standard the following definition applies.
3.1
delamination force
the force required to separate the component layers of a textile floor covering, measured over a width of 50 mm and expressed in newtons