※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 11908 は、ISO/TC 35塗料およびワニス技術委員会によって作成されました。小委員会 SC 10, 塗料およびワニス用バインダーの試験方法。
付属書 A は、この国際規格の不可欠な部分を形成します。
1 スコープ
この国際規格は、塗料、ワニスおよび関連製品のバインダーとして使用するアミノ樹脂およびアミノ樹脂溶液の一般的な試験方法を詳述しています。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 842:1984, 塗料およびワニスの原材料 - サンプリング。
- ISO 1523:1983, 塗料、ワニス、石油および関連製品 - 引火点の測定 - 密閉カップ平衡法。
- ISO 2811:1974, 塗料およびワニス - 密度の測定。
- ISO 3219:1993, プラスチック - 液体状態またはエマルションまたは分散液のポリマー/樹脂 - 定義されたせん断速度での回転粘度計を使用した粘度の測定
- ISO 3251:1993, 塗料およびワニス — 塗料、ワニスおよび塗料およびワニス用バインダーの不揮発性物質の測定。
- ISO 3679:1983, 塗料、ワニス、石油および関連製品 - 引火点の測定 - 急速平衡法。
- ISO 3682:1996, 塗料およびワニス用バインダー - 酸価の測定 - 滴定法。
- ISO 4630:1981, 塗料およびワニス用バインダー - ガードナー カラー スケールによる透明な液体の色の推定。
- ISO 6271:1981, 透明な液体 - プラチナ コバルト スケールによる色の推定。
- ISO 9020:1994, 塗料およびワニス用バインダー - アミノ樹脂の遊離ホルムアルデヒド含有量の測定 - 亜硫酸ナトリウム滴定法。
3 定義
この国際規格の目的のために、次の定義が適用されます。
3.1
アミノ樹脂
メラミン、尿素、またはベンゾグアナミンなどのそれらの誘導体とホルムアルデヒドとの縮合から得られる合成樹脂。これらの樹脂はアルコールでエーテル化されることがよくあります。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11908 was prepared by Technical Committee ISO/TC 35, Paints and varnishes. Subcommittee SC 10, Test methods for binders for paints and varnishes.
Annex A forms an integral part of this International Standard.
1 Scope
This International Standard details general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 842:1984, Raw materials for paints and varnishes — Sampling.
- ISO 1523:1983, Paints, varnishes, petroleum and related products — Determination of flashpoint — Closed cup equilibrium method.
- ISO 2811:1974, Paints and varnishes — Determination of density.
- ISO 3219:1993, Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
- ISO 3251:1993, Paints and varnishes — Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes.
- ISO 3679:1983, Paints, varnishes, petroleum and related products — Determination of flashpoint — Rapid equilibrium method.
- ISO 3682:1996, Binders for paints and varnishes — Determination of acid value — Titrimetric method.
- ISO 4630:1981, Binders for paints and varnishes — Estimation of colour of clear liquids by the Gardner colour scale.
- ISO 6271:1981, Clear liquids — Estimation of colour by the platinum-cobalt scale.
- ISO 9020:1994, Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method.
3 Definition
For the purposes of this International Standard, the following definition applies.
3.1
amino resin
Synthetic resin resulting from the condensation of melamine or urea or their derivatives such as benzoguanamine with formaldehyde. These resins are often etherified with alcohols.