ISO 11999-6:2024 消防士のための PPE — 構造物内で発生した火災の消火中に高レベルの熱および/または炎にさらされる危険がある消防士が使用する PPE のテスト方法と要件 — Part 6:履物 | ページ 2

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives ).

ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents . ISO shall not be held responsible for identifying any or all such patent rights.

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html .

This document was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 14, Firefighters' personal equipment.

This second edition of ISO 11999-6 cancels and replaces the first edition (ISO 11999-6:2016), which has been technically revised.

The main changes are as follows:

• Level A1 and A2 deleted to provide a single level of performance;
• insertion of updated ISO 20345:2021/Amd 1:2024 references;
• references to ISO 20344:2011 and ISO 20345:2011 have been deleted;
• chemical resistant footwear requirements and method updated.
• flame resistance requirements and method updated.
• insulation against Heat requirements updated.
• Tables 2 and 3 have been updated.

A list of all parts in the ISO 11999 series can be found on the ISO website.

1 Scope

This document specifies the minimum design and performance requirements for footwear as part of personal protective equipment [PPE] to be used by firefighters, primarily but not solely to protect against flame and high thermal loads while fighting fires occurring in structures.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 20344, ISO 11999-1 and EN 13832-1 apply.

ISO and IEC maintain terminology databases for use in standardization at the following addresses:

Bibliography