※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
国際規格 ISO 12091 は、技術委員会 ISO/TC 138, 流体の輸送のためのプラスチック パイプ、継手およびバルブ、小委員会 SC 5, プラスチック材料のパイプ、継手およびバルブの一般的特性およびそれらの付属品 — 試験方法および基本仕様によって作成されました。 .
附属書 A は、この規格の不可欠な部分を形成します。附属書 B および C は情報提供のみを目的としています。
1 スコープ
この国際規格は、オーブン内での加熱の影響を検査することにより、滑らかでない構造化壁の熱可塑性パイプのパイプ壁の均一性を評価する方法を指定しています。
この方法は、滑らかな外面を持つパイプの試験には適用できません。
注記 1この試験には、縦方向の戻りの測定は含まれない (附属書 C を参照)
2 つの定義
この国際規格の目的のために、次の定義が適用されます。
2.1
壁の分離
多層設計におけるレイヤー間の分離。
注記 1:壁の分離は、通常、パイプの表層に目に見える気泡が形成されることとして認識されます。切断端での層の分離は、失敗を構成するとは見なされません。
2.2
水膨れ
管壁層が内部で泡状に分離すること。
附属書C
参考文献
| [1] | ISO 1043-1:1987, プラスチック - シンボル - Part 1: 基本的なポリマーとその特殊な特性。 |
| [2] | ISO 2505-1:1994, 熱可塑性パイプ - 縦方向の反転 - Part 1: 測定方法。 |
| [3] | ISO 2505-2:1994, 熱可塑性パイプ - 縦方向の反転 - Part 2: 測定パラメーター。 |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 12091 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 5, General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications.
Annex A forms an integral part of this International Standard. Annexes В and C are for information only.
1 Scope
This International Standard specifies a method for assessing the pipe wall homogeneity of non-smooth, structured-wall thermoplastics pipes by inspection of the effects of heating in an oven.
The method is not applicable to the testing of pipes with a smooth external surface.
NOTE 1 This test does not include measurement of the longitudinal reversion (see annex C).
2 Definitions
For the purposes of this International Standard, the following definitions apply:
2.1
wall separation
Separation between the layers in multilayer designs.
Note 1 to entry: Wall Separation is normally recognized as the formation of visible bubbles in the surface layer of the Pipe. Separation of layers at the cut ends is not considered to constitute a failure.
2.2
blister
Separation of a pipe wall layer internally in the form of a bubble.
Annex C
Bibliography
| [1] | ISO 1043-1:1987, Plastics — Symbols — Part 1: Basic polymers and their special characteristics. |
| [2] | ISO 2505-1:1994, Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods. |
| [3] | ISO 2505-2:1994, Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters. |