※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化機関 (ISO メンバー団体) の世界的な連合です。国際規格の策定作業は、ISO 技術委員会を通じて実施されます。技術委員会が設置された主題に関心のあるすべての会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。
技術委員会によって採択された国際規格の草案は、ISO 理事会によって国際規格として承認される前に、承認のためにメンバー団体に回覧されます。
国際規格 ISO 120 は、技術委員会 ISO/TC 61, プラスチックによって開発され、1975 年 10 月にメンバー団体に回覧されました。
以下の国の加盟団体によって承認されています。
| オーストラリア | イラン | 南アフリカ共和国 |
| オーストリア | イスラエル | スペイン |
| ベルギー | イタリア | スウェーデン |
| ブラジル | 日本 | スイス |
| チェコスロバキア | メキシコ | 七面鳥 |
| フィンランド | オランダ | イギリス |
| フランス | ニュージーランド | アメリカ |
| ドイツ | ペルー | ソビエト連邦 |
| ハンガリー | ポーランド | ユーゴスラビア |
| インド | ルーマニア |
この文書の不承認を表明した加盟団体はありませんでした。
この国際規格は、ISO 勧告 R 120-1959 を取り消し、置き換えます。ISO 勧告 R 120-1959 は、その技術的改訂を構成します。
1 適用範囲と適用分野
この国際規格は、フェノールホルムアルデヒド成形品中のアンモニア量の半定量測定のための比色比較法を規定しています。
注 —この国際規格は、存在するアンモニアの絶対的な尺度を提供していません。
成形品中のアンモニアの量は、金属インサートの腐食または成形品と接触する食品の汚染を考慮する必要がある場合に重要です。
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation of national standards institutes (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been set up has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 120 was developed by Technical Committee ISO/TC 61, Plastics, and was circulated to the member bodies in October 1975.
It has been approved by the member bodies of the following countries:
| Australia | Iran | South Africa, Rep. of |
| Austria | Israel | Spain |
| Belgium | Italy | Sweden |
| Brazil | Japan | Switzerland |
| Czechoslovakia | Mexico | Turkey |
| Finland | Netherlands | United Kingdom |
| France | New Zealand | U.S.A. |
| Germany | Peru | U.S.S.R. |
| Hungary | Poland | Yugoslavia |
| India | Romania |
No member body expressed disapproval of the document.
This International Standard cancels and replaces ISO Recommendation R 120-1959, of which it constitutes a technical revision.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies a colorimetric comparison method for the semi-quantitative determination of the amount of ammonia in phenol-formaldehyde mouldings.
NOTE — This International Standard does not provide an absolute measure of the ammonia present.
The amount of ammonia in a moulded article is of importance when corrosion of metal inserts or contamination of foodstuffs in contact with the article has to be considered.
2 REFERENCES
- ISO 565, Test sieves — Woven metal wire doth and perforated plate — Nominal sizes of apertures.
- ISO 648, Laboratory glassware — One-mark pipettes.