※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 3 に規定されている規則に従って起草されています。
技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
ISO 12164 のこのパートの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
国際規格 ISO 12164-2 は、技術委員会 ISO/TC 29, Small toolsによって作成されました。
ISO 12164 は、次の部分で構成されており、一般的なタイトルは、フランジ接触面を備えた中空テーパー インターフェースです。
- Part 1: シャンク - 寸法
- Part 2: レシーバー - 寸法
ISO 12164 のこの部分の付属書 A は、情報提供のみを目的としています。
1 スコープ
ISO 12164 のこのパートでは、ISO 12164-1 に従って工作機械 (旋盤、ボール盤、フライス盤、研削盤など) に適用される中空テーパー シャンク用のテーパーおよびフランジ接触面を備えたレシーバーの寸法を指定します。サイズの範囲が指定されています。
ISO 12164 のこのパートでは、2 つのスタイルの受信機を指定しています。スタイル A は自動ツール交換用で、スタイル C はレシーバーとツール シャンクの両方の穴を介して達成される手動クランプ用です。
トルクは、キーと摩擦を介してシャンクのテール エンドを介して伝達されます。
2 参考文献
現在、規範的な参考文献はありません。
- ISO 1101: —1) 、製品の幾何学的仕様 (GPS) — 幾何公差 — 形状、方向、位置、振れの公差
- ISO 2768-1:1989, 一般公差 — Part 1: 個々の公差表示のない長さ寸法および角度寸法の公差
- ISO 3040:1990, 技術図面 - 寸法と公差 - コーン
- ISO 12164-1, フランジ接触面を備えた中空テーパー インターフェース — Part 1: シャンク — 寸法
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 12164 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 12164-2 was prepared by Technical Committee ISO/TC 29, Small tools.
ISO 12164 consists of the following parts, under the general title Hollow taper interface with flange contact surface:
- Part 1: Shanks — Dimensions
- Part 2: Receivers — Dimensions
Annex A of this part of ISO 12164 is for information only.
1 Scope
This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-1 to be applied on machine tools (e.g. turning machines, drilling machines, milling machines and grinding machines). A range of sizes is specified.
This part of ISO 12164 specifies two styles of receiver. Style A is for automatic tool exchange and style C is for manual clamping which is achieved via holes in both the receiver and the tool shank.
Torque is transmitted via the tail end of the shank through keys as well as friction.
2 Normative references
There are no normative references at present.
- ISO 1101:— 1) , Geometrical Product Specifications (GPS)— Geometrical tolerancing— Tolerances of form, orientation, location and run-out
- ISO 2768-1:1989, General tolerances— Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 3040:1990, Technical drawings — Dimensioning and tolerancing — Cones
- ISO 12164-1, Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions