この規格 プレビューページの目次
※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、各国の標準化団体 (ISO メンバー団体) の世界的な連合です。国際規格の作成作業は、通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。 ISOと連携して、政府および非政府の国際機関もこの作業に参加しています。 ISO は、電気技術の標準化に関するすべての問題について、国際電気標準会議 (IEC) と緊密に協力しています。
国際規格は、ISO/IEC 指令のPart 2 部で規定されている規則に従って作成されます。
技術委員会の主な任務は、国際規格を準備することです。技術委員会によって採択されたドラフト国際規格は、投票のためにメンバー団体に配布されます。国際規格として発行するには、投票するメンバー団体の少なくとも 75% による承認が必要です。
このドキュメントの要素の一部が特許権の対象となる可能性があることに注意してください。 ISO は、そのような特許権の一部または全部を特定する責任を負わないものとします。
ISO 12180-2 は、技術委員会 ISO/TC 213, 寸法および幾何学的製品の仕様と検証によって作成されました。
この ISO 12180-2 の初版は、技術的に改訂された ISO/TS 12180-2:2003 を取り消して置き換えます。
ISO 12180 は、次の部分で構成されており、一般的なタイトルは「幾何学的製品仕様 (GPS) - 円筒度」です。
- Part 1: 円筒形の語彙とパラメータ
- Part 2: 指定演算子
序章
ISO 12180 のこの部分は、幾何学的製品仕様 (GPS) 規格であり、一般的な GPS 規格と見なされます (ISO/TR 14638 を参照)これは、基準チェーンのチェーン リンク 3 に影響を与え、(データムとは無関係に) サーフェスの形状に影響を与えます。
ISO/TR 14638 に記載されている ISO/GPS マスタープランは、ISO 12180 のこの部分が含まれる ISO/GPS システムの概要を示しています。別段の指示がない限り、ISO 8015 に規定されている ISO/GPS の基本規則は ISO 12180 のこの部分に適用され、ISO 14253-1 に規定されているデフォルトの決定規則は ISO 12180 のこの部分に従って作成された仕様に適用されます。
ISO 12180 のこの部分と他の規格および GPS マトリックス モデルとの関係の詳細については、付録 C を参照してください。
ISO 12180 のこのパートでは、ISO 17450-2 に従って、一体形体の円筒度に関する仕様演算子を指定しています。
ISO 12180 のこのパートの発行時点で、ISO/TC 213 は、1 回転あたりのフィルターのうねり (UPR)、プローブ先端の半径、および関連付けの方法 (参照シリンダー) のデフォルトについて合意に達することができませんでした。これは、円筒度の仕様が一意であるためには、これらの仕様操作でどの値を使用することを意図しているかを明示的に述べる必要があることを意味します。
したがって、これらの演算子の 1 つ以上にどの値を使用するかが仕様に明示的に記載されていない場合、仕様はあいまいであり (ISO 17450-2 を参照)、サプライヤーは演算子に任意の値を使用できます。適合性を証明するときに指定されます。
データの抽出には、常に特定のフィルタリング プロセスの適用が伴います。抽出されたデータの追加のフィルタリングが適用される場合と適用されない場合があります。この追加のフィルターは、平均線フィルター (ガウス、スプライン、ウェーブレットなど) または非線形フィルター (形態学的フィルターなど) にすることができます。フィルタリングのタイプは、円筒度の定義と指定演算子に影響を与えるため、明確に述べる必要があります。
注 1スタイラス フィルタリングだけでは、プロファイルを滑らかにするのに十分ではありません。特定の状況では、偽の高周波コンテンツが作成され、誤った値が返される可能性があります。これを補正するために、長波通過フィルターが採用されています。これは国際規格の最先端であるため、ガウス フィルタが使用されます。このフィルターにはいくつかの欠点があります。たとえば、粗さの特徴を除去するのではなく歪ませたり、うねりの特徴を正しく送信するのではなく歪ませたりする可能性があります。 ISO 内で開発中の新しいフィルタは、これらの問題のいくつかに対してより優れたソリューションを提供することが想定されています。
注記 2所定のカットオフ長に対して指定されたものよりも小さい先端半径が使用される場合、得られる測定値は一般に高くなります。通常、この効果は重要ではありません。より大きな先端半径を使用すると、結果として得られる測定値は一般的に低くなります。変化量は、測定される表面に大きく依存します。
注記 3 0 N の測定力は、仕様オペレータからワークピースの弾性変形の影響を排除するために選択されます。十分な厚さの金属表面では、通常発生する測定力の影響は無視できます。
注記 4抽出中のエイリアシングおよびその他の問題 (付録 A を参照) は、皮膚モデルの真円度および真直度方向の高調波成分によるものであり、仕様の不確実性を引き起こす可能性があります。
ISO 12180 のこの部分は、円筒度を測定する手段を禁止するものではありません。
1 スコープ
ISO 12180 のこの部分は、完全な一体形体のみの円筒度、つまりタイプ シリンダーの形体の幾何学的特性の完全仕様演算子を指定します。
2 参考文献
本書の適用には、以下の参考文献が不可欠です。日付のある参考文献については、引用された版のみが適用されます。日付のない参照については、参照文書の最新版 (修正を含む) が適用されます。
- ISO 11562:1996, Geometrical Product Specifications (GPS) — 表面テクスチャ: プロファイル法 — 位相補正フィルターの計測特性
- ISO 12180-1:2011, 幾何学的製品仕様 (GPS) — 円筒度 — Part 1: 円筒形の語彙とパラメータ
- ISO 12181-1:2011, 幾何学的製品仕様 (GPS) — 真円度 — Part 1: 真円度の語彙とパラメーター
- ISO 12780-1:2011, 幾何学的製品仕様 (GPS) — 真直度 — Part 1: 真直度の語彙とパラメーター
- ISO 14253-1:1998, Geometrical Product Specifications (GPS) — ワークピースおよび測定機器の測定による検査 — Part 1: 仕様への適合または不適合を証明するための決定規則
- ISO 17450-2: — 1) 、幾何学的製品仕様 (GPS) — 一般概念 — Part 2: 基本的な信条、仕様、オペレーター、および不確実性
3 用語と定義
このドキュメントの目的のために、ISO 11562, ISO 12180-1, ISO 12181-1, ISO 12780-1, および ISO 17450-2 に記載されている用語と定義が適用されます。
参考文献
| [1] | ISO 8015, 幾何学的製品仕様 (GPS) — 基礎 — 概念、原則、および規則 |
| [2] | ISO/TR 14638, 幾何学的製品仕様 (GPS) — マスター プラン |
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12180-2 was prepared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification.
This first edition of ISO 12180-2 cancels and replaces ISO/TS 12180-2:2003, which has been technically revised.
ISO 12180 consists of the following parts, under the general title Geometrical product specifications (GPS) — Cylindricity:
- Part 1: Vocabulary and parameters of cylindrical form
- Part 2: Specification operators
Introduction
This part of ISO 12180 is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638). It influences chain link 3 of the chain of standards on form of a surface (independent of a datum).
The ISO/GPS Masterplan given in ISO/TR 14638 gives an overview of the ISO/GPS system of which this part of ISO 12180 is a part. The fundamental rules of ISO/GPS given in ISO 8015 apply to this part of ISO 12180 and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this part of ISO 12180, unless otherwise indicated.
For more detailed information on the relationship of this part of ISO 12180 to other standards and the GPS matrix model, see Annex C.
This part of ISO 12180 specifies the specification operators according to ISO 17450-2 for cylindricity of integral features.
At the time of publication of this part of ISO 12180, ISO/TC 213 has not been able to reach consensus on defaults for filter undulation per revolution (UPR), probe tip radius and method of association (reference cylinder). This means that it is necessary for a cylindricity specification to explicitly state which values are intended for use with these specification operations in order for it to be unique.
Consequently, if a specification does not explicitly state which values are to be used for one or more of these operators, the specification is ambiguous (see ISO 17450-2) and a supplier can use any value for the operator(s) not specified when proving conformance.
Extracting data always involves applying a certain filtering process. An additional filtering of the extracted data might or might not be applied. This additional filter can be a mean line filter (Gaussian, spline, wavelet, etc.) or a non-linear filter (e.g. morphological filter). The type of filtering influences the definition of cylindricity and the specification operators and, therefore, needs to be stated unambiguously.
NOTE 1 Stylus filtering is not sufficient on its own to smooth a profile. In certain circumstances, it can create spurious high-frequency content, thus giving incorrect values. To correct this, a longwave pass filter is employed. A Gaussian filter is used, since this is the state-of-the-art in International Standards. This filter has some shortcomings, e.g. it can distort, rather than eliminate some roughness features and it can distort, rather than transmit correctly some waviness features. It is envisioned that new filters under development within ISO provide better solutions for several of these issues.
NOTE 2 If a smaller tip radius than the one specified is used for a given cut-off length, the resulting measured value is generally higher. This effect is usually insignificant. If a larger tip radius is used, the resulting measured value is generally lower. The amount of change is heavily dependent on the surface measured.
NOTE 3 The measuring force of 0 N is chosen to eliminate effects of elastic deformation of the workpiece from the specification operator. On metal surfaces with adequate thickness, the effect of normally occurring measuring forces is negligible.
NOTE 4 Aliasing and other problems during extraction (see Annex A) due to the higher harmonic content of the skin model, in the roundness and straightness directions, can cause specification uncertainty.
This part of ISO 12180 is not intended to disallow any means of measuring cylindricity.
1 Scope
This part of ISO 12180 specifies the complete specification operator for cylindricity of complete integral features only, i.e. geometrical characteristics of features of type cylinder.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 11562:1996, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Metrological characteristics of phase correct filters
- ISO 12180-1:2011, Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form
- ISO 12181-1:2011, Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness
- ISO 12780-1:2011, Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness
- ISO 14253-1:1998, Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications
- ISO 17450-2:— 1) , Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators and uncertainties
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11562, ISO 12180-1, ISO 12181-1, ISO 12780-1 and ISO 17450-2 apply.
Bibliography
| [1] | ISO 8015, Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules |
| [2] | ISO/TR 14638, Geometrical product specification (GPS) — Masterplan |