※一部、英文及び仏文を自動翻訳した日本語訳を使用しています。
序文
ISO (国際標準化機構) は、国家標準化団体 (ISO メンバー団体) の世界的な連合体です。国際規格の作成作業は通常、ISO 技術委員会を通じて行われます。技術委員会が設立された主題に関心のある各会員団体は、その委員会に代表される権利を有します。政府および非政府の国際機関も ISO と連携してこの作業に参加しています。 ISO は、電気技術の標準化に関するあらゆる事項について、国際電気標準会議 (IEC) と緊密に協力しています。
技術委員会によって採択された国際規格草案は、投票のために加盟団体に回覧されます。国際規格として発行するには、投票を行った加盟団体の少なくとも 75% による承認が必要です。
国際規格 ISO 12205 は、ISO/TC 28石油製品および潤滑油技術委員会によって作成されました。
この国際規格の附属書 A は情報提供のみを目的としています。
警告 — この国際規格の使用には、危険な物質、作業、および機器が含まれる可能性があります。この規格は、その使用に関連するすべての安全上の問題に対処することを目的とするものではありません。適切な安全衛生慣行を確立し、使用前に規制上の制限の適用可能性を判断することは、この規格のユーザーの責任です。
1 スコープ
この国際規格は、加速酸化条件下での中間留分石油燃料の固有の安定性を測定するための手順を説明しています。残留成分、または非石油源からの重要な成分を含む燃料には適用されません。
この方法は、この試験の条件下で、約 175 °C 以上の初沸点と 370 °C 以下の 90% ( V / V ) 回収点を持つ中間留分燃料の貯蔵安定性を推定するための基礎を提供します。 。
この方法では、一定期間にわたって現場保管中に形成される不溶物の量を予測できない場合があります。このような不溶物の量は特定の条件の影響を受けるため、この試験方法では変動しすぎて正確に予測できません。
注 1酸化は、付着性で濾過可能な不溶物を形成させる化学プロセスです。銅やクロムなど、酸化反応を触媒する物質は、より大量の不溶物の形成を引き起こします。
2 規範的参照
以下の規格には、本文中の参照を通じてこの国際規格の条項を構成する条項が含まれています。発行時点では、示されているエディションは有効です。すべての規格は改訂される可能性があり、この国際規格に基づく協定の当事者は、以下に示す規格の最新版を適用する可能性を調査することが推奨されます。 IEC および ISO のメンバーは、現在有効な国際規格の登録簿を維持しています。
- ISO 3170:1988, 石油液体 - 手動サンプリング。
- ISO 3171:1988, 石油液体 - パイプラインの自動サンプリング。
- ISO 3696:1987, 分析実験室で使用する水 - 仕様と試験方法。
- ISO 6246:— 1) 、石油製品 — 軽質および中間留分燃料のガム含有量 — ジェット蒸発法。
- ISO 6353-2:1983 および付録 2:1986, 化学分析用試薬 - Part 2: 仕様 - 最初のシリーズ。
3 つの定義
この国際規格の目的のために、次の定義が適用されます。
3.1
付着した不溶物
このテストの条件下で中間留分燃料に負荷をかける過程で生成される物質で、燃料がシステムから洗い流された後にガラス製品に付着します。
3.2
濾過可能な不溶物
この試験の条件下で中間留分燃料にストレスをかける過程で生成される物質で、濾過によって燃料から除去できる物質。これには、燃料中に浮遊している物質と、炭化水素溶媒を使用して酸化セルおよび酸素供給チューブから容易に除去される物質の両方が含まれます。
3.3
固有の安定性
空気にさらされても、水や反応性の金属表面や汚れなどの他の環境要因がない場合の変化に対する耐性。
3.4
完全に不溶性
付着した不溶物と濾過可能な不溶物の合計。
3.5
ゼロタイム
最初の酸化セルを加熱浴に入れる時間。
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 12205 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants.
Annex A of this International Standard is for information only.
WARNING — The use of this International Standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1 Scope
This International Standard describes a procedure for the measurement of inherent stability of middle-distillate petroleum fuels under accelerated oxidizing conditions. It is not applicable to fuels containing residual components, or any significant component from a non-petroleum source.
The method provides a basis for the estimation of the storage stability, under the conditions of this test, of middle-distillate fuels with an initial boiling point above approximately 175 °C and a 90% (V/V) recovery point below 370 °C.
The method may not provide a prediction of the quantity of insolubles that will form in field storage over any given period of time. The amount of such insolubles is subject to the specific conditions, which are too variable for this test method to predict accurately.
NOTE 1 Oxidation is a chemical process causing adherent and filterable insolubles to form. Any substance such as copper or chromium that catalyses oxidation reactions will cause greater quantities of insolubles to form.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
- ISO 3170:1988, Petroleum liquids — Manual sampling.
- ISO 3171:1988, Petroleum liquids — Automatic pipeline sampling.
- ISO 3696:1987, Water for analytical laboratory use — Specification and test methods.
- ISO 6246:— 1) , Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method.
- ISO 6353-2:1983 and Addendum 2:1986, Reagents for chemical analysis — Part 2: Specifications — First series.
3 Definitions
For the purposes of this International Standard, the following definitions apply.
3.1
adherent insolubles
Material, produced in the course of stressing middle-distillate fuel under the conditions of this test, that adheres to the glassware after the fuel has been flushed from the system.
3.2
filterable insolubles
Material, produced in the course of stressing middle-distillate fuel under the conditions of this test, that is capable of being removed from the fuel by filtration. This includes both material suspended in the fuel and material removed easily from the oxidation cell and oxygen delivery tube with hydrocarbon solvent.
3.3
inherent stability
Resistance to change when exposed to air, but in the absence of other environmental factors such as water, or reactive metallic surfaces or dirt.
3.4
total insolubles
Sum of adherent and filterable insolubles.
3.5
zero time
Time at which the first oxidation cell is placed in the heating bath.
Annex A
Bibliography
| 1 | ISO 4263:1986, Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics. |